Disclaimer: The following is provided as a GUIDE ONLY, and neither myself nor Ozhonda take any responsibility for the outcomes of someone else doing the following. You follow these steps at your own risk!
Aim: to make current rims look sexy![]()
Required: 1 can of primer, 1 can of clear coat, 2-3 cans of black gloss wheel spray and some sand paper.
Currently wat it looks like![]()
Step 1 :
So firstly we taped the lip with normal masking tape and then again with newspaper so it covers the tyre and lip.
Step 2:
after that we applied a coat of primer, couldnt be stuffed sanding down first b4 primer but is an option.
Step 3:
wait until primer drys and check if all surface has been covered, then start applying the black coat of paint like this
Step 4:
After applying a few coats of black so all is covered, wait until it is COMPLETELY dried. then apply Clear coat same as Step 3 but with the clear coat can. try to add an extra coat every 20-30 mins up to around 3-4 coats of clear coat.
when completely dried remove masking tape to uncover sexy lip
then on the car![]()
![]()
this was my first DIY so be kind too me![]()
big thanks to my friend Thai aka thaizeg on Ozhonda and Hai aka Haiz for the tools, u no wat it was.
Bookmarks