Page 2 of 2 FirstFirst 12
Results 13 to 24 of 24

Thread: DC2 key

  1. #13
    Member Array
    Join Date
    Jan 2005
    Location
    melb
    Car:
    dc5r
    check this out

    http://cgi.ebay.com.au/Honda-Key-CRX...QQcmdZViewItem

    hope that helps ;D

  2. #14
    hey

    im after a blank dc2r key , the jdm one with the red rubber ..

    anybody know where to find ?

  3. #15
    Account Disabled Array
    Join Date
    Jul 2005
    Location
    Pariaman, Indonesia
    Car:
    Mitsubishi Colt TME
    steebs, waste of time.

    This is a Honda Keyblank used on Integra, CRX, CRV, Accord, Civic etc and is used on 90's models up to late models
    pre- immobiliser chip in actual head of key
    And the dude has an immobiliser

  4. #16
    Quote Originally Posted by MR_PEA
    im pritty sure u have too cos the keys are coded....
    not too sure how much they cost though....would expect over the 200 dollar mark

    when i owned a 91 integra i bought a new key for $25 not that expensive as u suggesting plus my key was so old it came with the code on it haha so i didn't really need to buy one from honda but i did anyway

  5. #17
    Account Disabled Array
    Join Date
    Jul 2005
    Location
    Pariaman, Indonesia
    Car:
    Mitsubishi Colt TME
    yeah, but theres another dude in this same thread asking how to get a new key cut.

    the original guy could take it to Mr Minit or whatever it's called and get one cut.

    The immobiliser guy either needs a new ignition barrel with two keys, or to get it done and reprogrammed by honda.

  6. #18
    Member Array
    Join Date
    Dec 2003
    Location
    Tamworth, NSW
    Car:
    Integra DC2 & DC4
    i'm sure member Tinkerbell had a black immobiliser key copied without a red key by someone in sydney.. maybe talk to him about it

  7. #19
    Newcomer Array
    Join Date
    Dec 2005
    Location
    melbourne
    Car:
    DC2R
    u can get them cut and coded at oakleigh locksmiths if ur in melb cost me 90 bux but u dont get the H cover on the key. i was referred there by honda if i didnt want the H cover so i just went there. honda was asking more than 100 bux! 95686344 give them a call if u want

  8. #20
    Member Array
    Join Date
    Aug 2004
    Location
    Adelaide
    Car:
    1993 Integra
    I bought two blank keys from honda for a whole $8 each they said i had to take my current key to the locksmith and get it cut to shape...

    hope that helps!

  9. #21
    Member Array
    Join Date
    Feb 2006
    Location
    Melbourne
    Car:
    ex-DA9, Altezza
    wot the hell...$8????? is it the dc2 key or the older version? i want the dc2 one.....hehehe....and my car dun have imobiliser...so its ok...i can use any key......but the dc5 is a bit longer...so it looks funny if i use that...
    ModBox

  10. #22
    Green block gangster Array
    Join Date
    May 2004
    Car:
    twin GX160's
    yes its an older version

    94 doesnt have a immobilser

  11. #23
    Member Array
    Join Date
    Feb 2006
    Location
    Melbourne
    Car:
    ex-DA9, Altezza
    do they still look like the dc2r keys?
    ModBox

  12. #24
    Green block gangster Array
    Join Date
    May 2004
    Car:
    twin GX160's
    no they dont
    no immo keys look like old skool honda keys eg 92 civic

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.