Is it EGR (Exhaust Gas Recirculation )valve???

[Crapdaz]

hi sorry but i've been searching a while and i havent found the answer, for the stock air box u have a tubing coming from the engine to the airbox then another tubing from the airbox to the left front side of the car

i wanted to know if that was the EGR valve + if you wanted to install a short ram intake into that position what would happen to the EGR valve if so???

thanks in advance cheers
daz

[EuroAccord13]

Tech Section...

[hayashi_1986]

Tech Section...

I think this IS the tech section

[Eclipsor]

Probably wasn't before he moved it.

And if I'm understanding you right crapdaz I think you're on the wrong track. The EGR Valve sits off your intake manifold. Looks something like this http://www.car-stuff.com/hondaegrvalve.htm

Here is an intake diy from trav which shows most of the steps you'd need to take for most intake replacements. http://www.ozhonda.com/forum/showthread.php?t=17260

Sorry if I've misunderstood what you're asking.

edit: just saw you have a euro. Not sure if any of what I said would apply.

[ECU-MAN]

your talking about the PCV system

positve carankcase ventalation

you can put a little filter in place if you decide to not use it.

dont know how this would affect the euro though

[geo41e]

ecu mans correct
it is called a PCV valve

and all u gotta do it either but a breather filter on it
or if the sri has a hole, plug it there.

EGR valve..intake manifold?? doesn't it stand for Exhust Gas Relief valve and sits on the zorst ?

[ECU-MAN]

on hondas it sits on the intake mannfold,
Iv allways known it to be called
Exhaust Gas Recirculation Lift Solenoid ( for Hondas )