Vtec oil pressure

[tinkerbell]

I'm picking my pressure up from my vtec oil line its a b20
i got a T joint on it
on idel its atleast 15-20 psi and normal driving its up to about 60-70 psi
I think I may pump up my oil pressure a bit on the weekend


Vtec mostly dopes out in second gear after 6500-7000 RPM and the car sounds flat
doesnt happen n first gear

i have treied adding a little oil just 2mm aove the fill line didnt help

i jsut installed my oil cooler,

pressure is now 60-70psi normal driving, around 25psi at idle...

it does not drop out of VTEC, and goes down to 60psi when VTEC kicks in (my sensor is ALSO located on the VTEC oil line coming from the back of the block)