Cam specs(more duration = more power??)

[Slow96GSR]

I always trust the web site. If you call and talk to Brian he should be able to tell you what you need. Really any tech there can but I always get Brian. I would go by the web site but that's me.

[locote]

well im waiting on his email.
i dont realy wanna call but i might have to.

[Cold Fusion]

if u brought retainers and springs for the 264, will they work in the 295?

[Slow96GSR]

Did you get set 84162 recomended for that cam off the site? If so then you are good. If not let me know and I'll call, that way you don't have a big phone bill! I looked and it seems like the longer the duration the less the lift is. Duration makes a difference in what spring you use but not as much as the lift.

[locote]

Hey thanks alot Slow96 GSR.
yes i got the recomended valve spring retainer set.
heres a copy of the cam card i got...
could you make an enquiry if its not too much trouble??

[Slow96GSR]

I shot Brian a email and he's out to lunch so he should have it and respond here in a few hours.

[Slow96GSR]

From: Dustin Spencer <dustin@crower.com>

The cam card is correct.

What I asked:

Subject: Cam cards. vs. web site?!

I have a friend that bought Cam 62403-2 and his card says duration 295, lift .422/.411 and the web site says the duration is 238/237, lift .425/.413. Which one should he go by? Thanks guys!

[Cold Fusion]

nice.

[locote]

Thanks GSR

[Slow96GSR]

No prob, any time.

[Non Vtec]

either way you will still have to dial them in and check clearances, Crowers cam cards suck arse, my K-series cams are alot bigger than the website or spec card says.. you'l' just need to check the max advance and retard the cams can have on adjustable gears, so you dont adjust them to much..

I also heard a rumour that brian is going to be leaving crower to start his own company, so you may not get a reply from him..

[Slow96GSR]

Already did.