Central locking in 98 civic cxi

[Surrufus]

if any1 wants to know the wire config (wat wires are for wat) lemme know

i would love to know

[abzndintegra]

ECUMAN ill take a pic on my next day off,

But i would also look to see ur work NUj take a few pics for us,

[nuj]

i'll take a pic of it and post it up as soon as i get some time...

the wire config (which was on my car) was:-

for the driver side:
red wire and yellow wire = motor
2 blue wires = switch
1 black wire = common

passenger side only has 2 wires coz its slave and they're both motor

the power lock relay u can pick up from jaycar for $15 (if you dont need the actuators)

or the actual 2 door c/locking kit for $30 which has everything u need including actuators, wires, power lock relay

[abzndintegra]

ECUMAN

OK ive taken a pic

http://members.optusnet.com.au/myhonda

looks like i have 3 wires

1 is the ground

2 are blue/white and blue/red these are also common on the 5 wire system (i verified via my spare wiring harness,

I also checked the left hand side, it s 2 wires, yelllow and white. these are the ones missing from the right hand side.

What does this mean? what am i missing, the weird thing is i though central locking was standard on EM1

Also wat is the point in putting all this wiring for only a switch and no motor?
why would honda do thaT?

then again from what ive described above it does sound like the left hand side does have a motor right?