Radiator Comparisons for DC2Rs

[fufu]

By chance anyone know if the radiator and a/c condensor for DC2Rs in general, so both AUDM and JDM, are the same? Reason asking is i'm in the process of repairing a 01 AUDM DC2R and need this information.

Just comparing it to standard dc2s and dc4s the earlier models had a different radiator design compared to the later models.



Hoping to hear from you, sorry if you all think this is a dumb question.
But atleast i'm resurrecting a dc2r

[barefootbonzai]

Yeah should be fine man. Any of the DCx radiators should fit in fine.

[Bowzer]

Radiators from the DC2 VTi-R/Type R are dual core radiators esp the VTi-R manual models. I can't confirm if the GSi model has dual core but im pretty sure its a single core the same as the auto models as they also have a auto trans cooler at the end tank. One way of differentiating the difference between them is the inlet and outlet necks on the dual core have a bigger diameter to the single, the thickness in the core itself is thinner.

[Q_ball]

This should be in the Integra section, not All Motor btw

[BlitZ]

how does the Ek radiator compare .. they are alot smaller but can they still handle the b20 or even the b18c5/7 ?

[tanghy]

no recommended to go double thickness or full length