looks great... very informative post...

couple comments though...


the dsm injectors will clip into the stock injector clips on an obd1 car... all you have to do is remove the little tab in the middle of the injector... 10 seconds witha razor blade... much better than chopping up the injector wiring.

Your oil return line looks like it may be going up into the oil pan... needs to be pointing down more. In the photo is could be ok, but it's borderline.

Also, why use such a tall intercooler? There are plenty available that maintain the same front area for air flow that don't require cutting of the bumper. The part of the intercooler hiding behind the bumper isn't getting any cooling air, and requires cutting the bumper beam which is there for safety reasons.