Regrind cams

**spetz** · 21-06-2005 12:35 AM

What are people's opinions on reground cams?
Steer clear of them or they are fairly good?
I heard basically cam life suffers a bit...

**SINISTR** · 21-06-2005 12:48 AM

There are different Vendors around the place that offer Regrinds... and each claims theirs are the best...

main things that can go wrong with regrinds - is warped cams, incorrect profiles... and actual structural damage due to heat etc.

there are some places that show you a complete process... and guarantee their work... eg: www.deltacams.com

Im guessing you're running a D-series engine?

**spetz** · 21-06-2005 02:28 PM

No I don't drive a Honda

It's a MIVEC, and the off the shelf cams for the engine is $2500 + cam gears, springs etc etc

**panda[cRx]** · 17-05-2006 04:18 PM

Originally Posted by SINISTR

There are different Vendors around the place that offer Regrinds... and each claims theirs are the best...

main things that can go wrong with regrinds - is warped cams, incorrect profiles... and actual structural damage due to heat etc.

there are some places that show you a complete process... and guarantee their work... eg: www.deltacams.com

Im guessing you're running a D-series engine?

bump

url doesn't work

anyone reccomend anywhere to do custom grinds?
not interested myself but a friend is very keen

**SINISTR** · 17-05-2006 05:42 PM

http://www.deltacam.com/ - just had the 's' on the end... sorry

**Slow96GSR** · 18-05-2006 06:15 AM

www.Crower.com and www.skunk2.com. Skunk might do it. A friend said he had his done there but there is no link to see if they do. Crower I know does it. There are a few local shop here that do it but the bigger companies are more likely to offer a better warranty.

**dsp26** · 18-05-2006 10:00 PM

www.wadecams.com <-- they use fresh billets and are in Melbourne

the worry with regrinds is the method. the shit one is:
- blobbing on some weld and "re-grinding" the profile. obviously its not seamless coz its welded.... this is guaranteed to come off over time.

there is another method can't remember....