[EURO] Shift Boot adapter

**Gerald28** · 19-05-2006 02:21 PM

just wanna ask if anyone knows how i can get a shift boot adapter for the euro?

I have just changed the knob to a skunk2 knob, but it doesnt come with the shift boot adapter.

I've asked honda and they can order in a euro sport boot, but the problem is they dunno if the boot comes with the ring/adapter.

I know the dc5/rsx knob comes with the adapter, but honda doesnt sell the adapter by itself.

i've already done a search b4, and couldnt find anything!
Hope u guys can help me out

**Peekay34** · 19-05-2006 02:30 PM

Mate ...There is nothing you have to buy the other knob to get the ring I searched high and low and could not find anything.

**kitbkk** · 19-05-2006 03:30 PM

I hope this is the one your looking for.. http://cgi.ebay.com/ebaymotors/Honda...temZ8018958681

This guy can be trusted..Shipping cost is cheaper than others as well.. I think this is the same boot adapter as the one that comes with my DC5 shift knob..hope it helps

**Peekay34** · 19-05-2006 04:31 PM

I had a look as well. I would not recommend this type as on the Euro you have a long gear knob in length. The problem you have is that the boot will get to close to the gear knob and the tips of your fingers will hit the boot which is a pain (well for me it is anyway). The other one is availble from this site from Scott as well just ask him. Acura of Escondido is very good and helpful. This is where I got the adapter (including the knob which I did not use) from that I used for my Skunk2 knob.

**aaronng** · 19-05-2006 07:15 PM

I don't think the boot will touch the knob.With my RSX knob, I would have a 2cm gap between the boot and the bottom nut. Of course, this gap is covered by the adapter that comes with the RSX knob. Give Acura of Escondido a message to ask if he sells the adapter separately.