New Product To Cool Your Oil

**kimo** · 26-05-2006 05:12 PM

Check this out:

http://cool-collar.com/

Does it work

**08ESE** · 26-05-2006 08:46 PM

they have been round for years....

not sure if they produce the results listed on that site though......

**civiceg9** · 26-05-2006 09:06 PM

I seen them around ages
but don't know if they really have that much of an impact on oil cooling.

**whtdc2** · 26-05-2006 09:38 PM

where can i buy one of this in OZ??

**dan125** · 27-05-2006 09:08 PM

What is the point of this. Oil filter on a jazz already has heaps of air flow going over it.

**kimo** · 28-05-2006 12:03 AM

The point is to let the heat transfer from the filter to the heatsink, it's like the CPU heatsink idea.

Originally Posted by dan125

What is the point of this. Oil filter on a jazz already has heaps of air flow going over it.

**kimo** · 01-06-2006 11:12 PM

Today i saw the AC fan which is near the oil filter, so if we install the Collar then it will work fine, as the air from the fan will cool it better.

**JasonGilholme** · 02-06-2006 06:04 AM

I can see this idea working, but would be unsure of the results.

Would be a cheap mod to do.

**bennjamin** · 02-06-2006 05:50 PM

if anything i can see this preventing proper cooling of the oil filter...the outer "heat sink jacket"is covering the oil filter itself and possibly will prematurely heat it up anyway.

**kimo** · 03-06-2006 05:55 AM

Wrong sir, it's like the CPU heatsink it transfer the heat from the CPU to the heatsink, and the old CPU had heatsink without fan, if what you said is true why theu didn't just leave the CPU without the heatsink, if you look it's the same idea, and I think it will work better in our car, as the AC fan blows some air to the filter, so this way it will cool the collar faster and better, and like I said before have a read a review of a guy has done it in his Ford truck, and his temp of the oil went down but not like if it was a oil cooler but better than nothing.

Originally Posted by bennjamin

if anything i can see this preventing proper cooling of the oil filter...the outer "heat sink jacket"is covering the oil filter itself and possibly will prematurely heat it up anyway.