Page 4 of 6 FirstFirst 123456 LastLast
Results 37 to 48 of 65

Thread: Gauges for NA

  1. #37
    Member Array
    Join Date
    Feb 2006
    Location
    Melbourne
    Car:
    EF8
    Sounds like one of those guys who wants blow-off noise without the turbo. Similarly, why don't you just use a boost gage and take it to an electronics expert and get them to wire it up so the needle moves randomly. (This is as bad as gluing a Type R badge on.)

    If you want a gauge, the best suggestion I can make is get a bling bling Tachometer. If you like bright lights, you can get one that has a shift light! The tacho will move "often" (assuming you actually drive the car) and it will actually have a practical purpose too.

    If for some reason you wanted to pretend to have boost, you could take the gaugue apart and replace the writing with "Boost" and voila.

  2. #38
    Member Array
    Join Date
    Aug 2004
    Location
    Brisbane
    Car:
    DC5 Type R
    yeh if u want guages that move get a vaccuum guage or an air/fuel ratio. most air.fuels hav a little coloured light that goes back and forth around the guage and vaccuum pressure will work 'sort of' like a boost guage if u like them. a boost guage has on it vaccuum then to positive pressure, so if u get a vaccuum guage it'll be like half a boost guage! just no boost pressure! which would be useless for u anyway! then just hav a look at different guages and see wa u look the look of!

    nic
    dc5r in the works....

  3. #39
    Member Array
    Join Date
    Oct 2005
    Location
    Melbourne
    Car:
    E92 M3
    save up for some 20's and some springs and pimp that bitch
    2007 BMW M3 Jerez Black/Palladium Silver
    2002 BMW M3 Ruby Black/Black - SOLD
    1999 Honda S2000 NFR/Black - SOLD

  4. #40
    get a black apexi RSM and mount towards the bottom ur A pillar... this will aid in you achieving interior boy-racer appeal...

  5. #41
    Member Array
    Join Date
    Oct 2004
    Location
    Sydney - Cabramatta/Liver
    Car:
    Jazz EVO IX
    oil temp & oil pressure guages will go up and down and look cool (get the ones with different colours)
    Then later when you get over it you can also make use of them.
    Evo IX - THE FINAL EVOLUTION

  6. #42
    Member Array
    Join Date
    Jul 2005
    Location
    Sydney, WPH
    Car:
    Integra DC5 Type R '03
    nah :P finally made up my mind. planning on getting
    + Comptech icebox
    + Cusco Fron Strut Bar
    + Pivot Stabliser

    no more gauges :P
    '03 Integra DC5 Type R

    Wakefield Park: 1:13.047 w/ street tyres
    Eastern Creek Int'l Raceway: 1:57.969 w/ street tyres
    Power: 155Kw with Mugen N1 ECU

  7. #43
    Member Array
    Join Date
    Oct 2004
    Location
    Sydney - Cabramatta/Liver
    Car:
    Jazz EVO IX
    but the look so cool hehehe
    I'll show you mine in a few weeks when i get them on
    Evo IX - THE FINAL EVOLUTION

  8. #44
    Quote Originally Posted by BusterSonic12
    sorry, i m bit newb. might sound stupid to some people lol

    is there gauges that shows boost or something similar for non turbo's cars??
    what are other available to NA?
    AHHAHAHAHHAHAHAHAHHAHAHAHHAHAHHAHAHAHAHHAHAHAHAHHA HAHAHHAHAHAHHAHAHAHHAHAHHAHAHAHHAHAHHAHAHHHAHAHHAH AHAHHAHAHHAHAHAHHAHAHHAHAHAHHAHAHHAHAHAHHAHAHAHAHH AHAHAHHAHAHHAHHAHAHHAHAH


    vaccum gauge for life!

  9. #45
    Member Array
    Join Date
    Nov 2005
    Location
    Sydney
    Car:
    integra ls
    Quote Originally Posted by BusterSonic12
    nah :P finally made up my mind. planning on getting
    + Comptech icebox
    + Cusco Fron Strut Bar
    + Pivot Stabliser

    no more gauges :P

    yes...you need that front strut bar to help with all the oversteer you will be getting ...you want a REAR tie bar
    Last edited by Mr_will; 18-06-2006 at 12:18 PM.

  10. #46
    psychotic
    Guest
    if you wanted to buy gauges... u shouldnt have bought a euro mate. cause you will be making a nice luxo car look tacky. unless u got defi's heh

    but.. u can always grab a monster tacho HAHAH
    Last edited by psychotic; 18-06-2006 at 12:27 PM.

  11. #47
    Member Array
    Join Date
    Jul 2005
    Location
    Sydney, WPH
    Car:
    Integra DC5 Type R '03
    thanks man !!
    i ordered my comptech last night!!


    Quote Originally Posted by Limbo
    but the look so cool hehehe
    I'll show you mine in a few weeks when i get them on
    '03 Integra DC5 Type R

    Wakefield Park: 1:13.047 w/ street tyres
    Eastern Creek Int'l Raceway: 1:57.969 w/ street tyres
    Power: 155Kw with Mugen N1 ECU

  12. #48
    Member Array
    Join Date
    Jul 2005
    Location
    Sydney, WPH
    Car:
    Integra DC5 Type R '03
    thanks for all the ideas, and comments, now the mods i got for my euro
    Defi- Link Meter BF (Intake Manifold Press.)
    Defi- Link Control Unit II
    Comptech Icebox
    Cusco front strut bar
    " lower arm bar (waiting to arrive)
    '03 Integra DC5 Type R

    Wakefield Park: 1:13.047 w/ street tyres
    Eastern Creek Int'l Raceway: 1:57.969 w/ street tyres
    Power: 155Kw with Mugen N1 ECU

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.