how to install the plate light?

**civicVI** · 09-08-2006 10:37 PM

just a quick question!
how to remove the plate light from the back door? as i want to change the other color LED!
thx

**civicVI** · 09-08-2006 10:39 PM

pls show me or teach me!
thx

**STTICH** · 09-08-2006 10:45 PM

go through your owner's manual. there should b exact steps for u to follow.

**LSD GD3** · 10-08-2006 02:39 AM

Originally Posted by civicVI

just a quick question!
how to remove the plate light from the back door? as i want to change the other color LED!
thx

is soooo easy it just pulls out
but from one side angle

**vividjazz** · 10-08-2006 08:13 PM

Requires a fair amount of force.

**edy_l** · 11-08-2006 11:25 AM

are you referring to the number plate light?
is easy .. open your back door until you can see the light from horisontal view .. hold the door with your left hand and slide the bulb cover to the left with your right hand (or you can ask one of your mates to hold the door for you)

..and you can pull it all the way out to change the bulb ..

**tonich** · 12-08-2006 12:38 AM

are all interior light uses same bulb as plate light (T10)? I read thorugh manual but it provides only voltage of bulb didnt mention which type to use.

are front parker light uses T10 as well?

**LSD GD3** · 12-08-2006 02:44 AM

Originally Posted by tonich

are all interior light uses same bulb as plate light (T10)? I read thorugh manual but it provides only voltage of bulb didnt mention which type to use.

are front parker light uses T10 as well?

no they are not... T10 is just small light and plate lights

interior is 3cm Kelly12V8W

**LSD GD3** · 12-08-2006 02:49 AM

Originally Posted by vividjazz

Requires a fair amount of force.

no it would not need much force if you doing it at the correct angle

**civiceg9** · 13-08-2006 01:00 AM

License Plates and Parkers are T10(10mm in size hence the name)
If you need help to install it u can come to me in Melb
or just ask any follow members of ausjazz. I think ahcash will help u out.