What size exhaust are you using with your TODA header.

[quangsta]

toda headers and BC spec III will be pretty loud not streetable i dont think....but u'll get heaps of power... i was recommended toda headers and fujistubo RM01a if you want power but minimal sound... this is from people in the 'know'

[xtercii]

does spoon exhaust make good power, better than buddy clubs?

[locote]

Im leaning more toward a 2.25, but ill be upgrading intake manifold to skunk2 and skunk2 stage 2 cams with running gear and (hopefully ) motec ECU other wise a microtech..
Id love to just dyno one and then the other to c which one i want lol.
i might do the exhaust last and see what it needs then.

[Nightrider]

^Wow nice setup.
You won lotto Locote?

[locote]

nah havent won lotto just wanna build a quik little honda thats all..

[sivic]

if you're doing headwork go 2.5", especially on a B18C.
but definately dont stick to the stock EG5 system.
you gotta remember these headers were designed for an ITR/CTR which came with 2.25" mandrel bent system STOCK, so thats the bare minimum you want to work with

[locote]

just got it bak today..
defenetly torqueer motor and once it hits vtec it goes.
but the iol still needs to be replaced and i wanna get the timing checked out just to make sure its spot on.
Im trying to figure out what gearbox is in it as the sticker was ripped of it.
doing 100kph it sits on 3000rpm spot on

[barefootbonzai]

just got it bak today..
defenetly torqueer motor and once it hits vtec it goes.
but the iol still needs to be replaced and i wanna get the timing checked out just to make sure its spot on.
Im trying to figure out what gearbox is in it as the sticker was ripped of it.
doing 100kph it sits on 3000rpm spot on

Has it got LSD? From my own car below.

CTR 4.4FD box - 100kph - 3500rpm
98 ITR box 4.785FD - 100kph - 3500rpm (5th gear longer, designed to save petrol in the ITR box)
CTR 4.9FD box - 100kph - 4000rpm

Sounds like you got a GSI box.

[sivic]

he got a SiR-G B18C not B18CR so more than likely its got the same box as in our VTiR's. fairly long ratios.

locote - shouldnt the oil have been changed during the swap along with coolant etc? are you sure it needs a change?