NEED HELP!!!! Audio Install On 6gn Accord ... Color Code

[will_pop]

guys ... .... >< ..... i was trying to install my new HU myself...
but then ... don't know the color coding of the wires....

(i got a few installation manul ... but then they don't have 1721 harness' color coding....)

anyway ... ok i figured out all the speakers wiring..

but now ... got a few unkown ones....
1) Red
2) Red with thin Black Stripe
3)White with thin Red Stripe
4)White with think Green Stripe

plz help me... since USA has the harness for them .. no one writes nothing about the coding ...

and does anyone kno if australia has harness...

anyway .. thx ops:

[b-defekt]

hey mate,

i dunno about the harness, but have u used a measuring pen and trial and error?

because thats the easiest way i find to label wires.

[will_pop]

oh okee..
but since i don't have a measuring pen...
now .. ... i think i might have just figured them out keke
i dunno if this is the same as the S2000 one .. but the color matchs...
(i found a menul fo s2000 and the new 2004 accord..)

anyway ... still need to confirm

[Dominik]

Mate, if you are installing a stereo without a multimeter or a test light then i wish you luck!

Test lights are under $5, and a multimeter can be bought for under $20... There really isnt any excuse not to have one!!!

[poid]

Mate, if you are installing a stereo without a multimeter or a test light then i wish you luck!

Test lights are under $5, and a multimeter can be bought for under $20... There really isnt any excuse not to have one!!!

Exactly right, saves you lots of headaches and means you wont torch your car

[vtecinaccord]

Dude go to install DR it is all there...

http://www.installdr.com/InstallDocs/Honda/Accord.html

[will_pop]

thanks guys....
i have went throught the Install DR ages ago... but it ain't showing the radio for australia 6 GEn..
but anyway ... i found a S2000 install manual ... and ... it's the same...

all wired up and it's rocking .. uplload some pic lateer keke....

thjanks for all ur help... and wohoo ..keke had a bit of luck ... not burned the machine up haha..