Should I Be Worried ? [WhiteLine Sway + Tie]

**tRipitaka** · 26-11-2006 10:14 PM

whiteline bolts suck balls..

snapped one while undoing it

**jdm_kid** · 26-11-2006 10:26 PM

Originally Posted by fatboyz39

what tie bar? whiteline?

Yup, Whiteline Tie Bar

**destrukshn** · 26-11-2006 10:34 PM

hms... lol. i've got the same setup.
lol.
i haven't looked under there for awhile..
maybe i should check it.
but that crack your talkin about isn't a crack.
lol.

**jdm_kid** · 26-11-2006 10:41 PM

Originally Posted by destrukshn

but that crack your talkin about isn't a crack.
lol.

oh yehh now i remember ! LOL so dooofus !

**iced** · 27-11-2006 01:11 AM

Originally Posted by e240

on pic 4 - Doesn't look cracked to me.

Its the slit in the D bush so that they can put in around the bar.

correct
if you installed it you should know this.

**e240** · 27-11-2006 01:19 PM

Actually, your mounting looks wierd, but it could be the angle.
Are the connecting eye bolts on the correct side of the sway bar?

Here's a couple of pics of my setup.

**spetz** · 27-11-2006 03:57 PM

Didn't read all the posts
But the bushes aren't cracked
They are cut there on purpose so they can fit them over the swaybar

Brand new ones come like that

**fatboyz39** · 28-11-2006 07:10 AM

its either that who installed them didn't do it properly or its just one of those F%^k up bars lol. But from the looks of it, its ben under alot of stress, i reckon its installed wrong? Mayb its upside down?

**BlitZ** · 29-11-2006 09:52 PM

i think your one is different.. the whiteline one is suppose to connect on the other side of the plates....

Originally Posted by e240

Actually, your mounting looks wierd, but it could be the angle.
Are the connecting eye bolts on the correct side of the sway bar?

Here's a couple of pics of my setup.

**Mr_will** · 30-11-2006 12:17 AM

show us your mounting plate too, might provide some more clues.

agree with whoever said change to the other holes on the end link

i checked all my bolts (22m bar on da9) the other day and found that one side was very very loose indeed, despite being installed tight. its definately worth checking and rechecking every bolt. incidently i snapped one of the whiteline ones whilst tightening it. they are pussy bolts