Hi i got the caliper brackets machined for $295, Here are a few pictures of the brakes ready to be put on the car. As you can see the calipers are centred and sit further over the Disk.This is what i have learned, EG civics have a 61mm centre hole diameter,where all integras 1989-2000 had a 64mm centre hole diameter, so the centre of the discs had to be machined out by 3mm with a taper to fit over the hub as well as machining of the bracket to centre the calipers and bring them closer to the disc. Thanks to Race Brakes in Wetherall Park.....Highly recommended, Later.
Thanks, i just bought a later model integra 1 inch master cylinder and brake booster my next headache, i'll also try and get some 11inch rear ventilated discs and bigger calipers which will have to incorporate the hanbrake, and maybe a hydraulic hanbrake....see how i go,later.
Hey Mate, looks cool, any words on how the braking is improved? Cheers, Chris
Every Day You Don't Practice, Is A Day You Get Worse
(\__/)
(='.'=) This is Bunny. Copy and paste bunny into your
(")_(") signature to help him gain world domination.
Reply With Quote
Originally Posted by bigjo5
. All up, would you say it was worth the hassle?
Bookmarks