instead of twisting and heat shrinking...
try connector blocks 2 screws one in either side
put one wire in one side tighten it up one wire in the other side tighten that up...
u can cut em up
http://www.marinemegastore.com/image...l/ECS_3170.JPG
easy...
but these are not the BEST options to wire up a headunit
the BEST option is always to solder and either heatshrink or insulation tape
theres nothing better... no chance of it shorting out if it falls out of the
connector block or slips out of the heatshrink when twisted together...
up to you
i soldered and insul taped mine...
Bookmarks