Disclaimer: The following are provided as a GUIDE ONLY, and neither myself. nor the original writer, nor Ozhonda take any responsibility for the outcomes of someone else doing the following. You follow these steps at your own risk!
Just a guide to install an Ultra Racing front strut bar in a Civic FD
Step 1: Buy the bar hehehe
Step 2: Open the packaging
Step 3: Open the cover for the suspension point by just pulling it off
Step 4: Pull the clips off the cover for the strut bar
Step 5: just pull the cover off...its a bit hard but they r just clips and position the strut bar like so
Step 6: Tighten the nuts supplied by the bar to the existing screw holes in following postion
and just reversed all the steps back to put all the trim back and thats all
heres the finished result
Bookmarks