Page 11 of 12 FirstFirst ... 89101112 LastLast
Results 121 to 132 of 138
  1. #121
    Member Array
    Join Date
    Nov 2010
    Car:
    inb4yursorryass
    Quote Originally Posted by GSi_PSi View Post
    Lol lovin it!
    B to BFrank to K .... ive had it ......

  2. #122
    Member Array
    Join Date
    Nov 2004
    Location
    Manly Yo
    Car:
    ED/EG5/EP3/JAZZ
    now now girls

    But man Engineering is not as simple as people think!

    I've been through Engineering twice and emissions testing 7 times and only passed once hahah

    Simple guide to passing after all I've dealt with

    For emission (free just need to book)
    Run stock ECU for the motor you'll installed (no tune)
    Run stock cat and exhaust
    Run stock 02 sensor
    Run E85

    I've tried the retune, detune route without luck!

    Engineering ($800 to $1200)
    Main thing is good brake upgrade
    keep the rest of the car stock IMO including real air box and not stupid pod

    Most peole do it wrong by moding the hell of their car and power tuning the new motor coze they can't wait
    Last edited by Lukezen27; 14-02-2012 at 05:40 PM.
    161.4KW ATW Tuned By TODA
    EG5 JDM B16A SiR-II TURBO

    13.28@106.6mph 2.117 60ft On RE001

  3. #123
    Member Array
    Join Date
    Sep 2007
    Location
    Sydney
    Car:
    DC2 Squared
    I'm still struggling...

    A "power tune" shouldn't affect your emissions testing result as the driver is never really 100% throttle and high enough RPMs (for us to even get into vtec too), even if the tuner has opted for max power at cruising conditions, the fuelling won't be anywhere near ~12.8:1. (assuming peak energy mixture for gasoline)

    What were the reasons for being knocked back with cat/exhaust, etc etc?

  4. #124
    Member Array
    Join Date
    Nov 2010
    Car:
    inb4yursorryass
    Quote Originally Posted by Lukezen27 View Post
    now now girls

    But man Engineering is not as simple as people think!

    I've been through Engineering twice and emissions testing 7 times and only passed once hahah

    Simple guide to passing after all I've dealt with

    For emission (free just need to book)
    Run stock ECU for the motor you'll installed (no tune)
    Run stock cat and exhaust
    Run stock 02 sensor
    Run E85

    I've tried the retune, detune route without luck!

    Engineering ($800 to $1200)
    Main thing is good brake upgrade
    keep the rest of the car stock IMO including real air box and not stupid pod

    Most peole do it wrong by moding the hell of their car and power tuning the new motor coze they can't wait
    now thats exactly the answer i wanted.

    so your saying running a base map with supporting stock parts installed - then it shouldnt be an issue.

    excellent to ALL who shared their experiences.

    -1 except for those who posted trolling pics rather than helpful info .. LOL
    B to BFrank to K .... ive had it ......

  5. #125
    Member Array
    Join Date
    Nov 2004
    Location
    Manly Yo
    Car:
    ED/EG5/EP3/JAZZ
    Quote Originally Posted by Chr1s View Post
    I'm still struggling...

    A "power tune" shouldn't affect your emissions testing result as the driver is never really 100% throttle and high enough RPMs (for us to even get into vtec too), even if the tuner has opted for max power at cruising conditions, the fuelling won't be anywhere near ~12.8:1. (assuming peak energy mixture for gasoline)

    What were the reasons for being knocked back with cat/exhaust, etc etc?
    Anyways emissions

    so many fails

    Mostly they said cat/exhaust would be the likely reason or cheap 02 sensor

    Quote Originally Posted by IV73CI View Post
    now thats exactly the answer i wanted.

    so your saying running a base map with supporting stock parts installed - then it shouldnt be an issue.

    excellent to ALL who shared their experiences.

    -1 except for those who posted trolling pics rather than helpful info .. LOL
    Correct but stock cat/exhaust and 02 sensor is a must
    161.4KW ATW Tuned By TODA
    EG5 JDM B16A SiR-II TURBO

    13.28@106.6mph 2.117 60ft On RE001

  6. #126
    Member Array
    Join Date
    Sep 2007
    Location
    Sydney
    Car:
    DC2 Squared
    I bet you that if you turn up there with aftermarket exhaust, intake and the stock ecu, you will fail.

    IVTECI - You're obviously best mates with BYP, why don't you get them to tune the car before you go to EPA? simple!

  7. #127
    Member Array
    Join Date
    Nov 2004
    Location
    Manly Yo
    Car:
    ED/EG5/EP3/JAZZ
    Quote Originally Posted by Chr1s View Post
    I bet you that if you turn up there with aftermarket exhaust, intake and the stock ecu, you will fail.

    IVTECI - You're obviously best mates with BYP, why don't you get them to tune the car before you go to EPA? simple!
    Yup

    you need max cat flash with the added displacement to pass emissons and nothings better than OEM

    Mine was added power being turbo but its the same thing
    161.4KW ATW Tuned By TODA
    EG5 JDM B16A SiR-II TURBO

    13.28@106.6mph 2.117 60ft On RE001

  8. #128
    Member Array
    Join Date
    Nov 2010
    Car:
    inb4yursorryass
    Quote Originally Posted by Chr1s View Post
    I bet you that if you turn up there with aftermarket exhaust, intake and the stock ecu, you will fail.

    IVTECI - You're obviously best mates with BYP, why don't you get them to tune the car before you go to EPA? simple!
    Thats what i was thinking. Put base tune and see what the emission gasses puts out. Then if all passed, then power tune as planned.

    Should still work with all the mods n crap on?
    B to BFrank to K .... ive had it ......

  9. #129
    Member Array
    Join Date
    Nov 2010
    Car:
    inb4yursorryass
    Quote Originally Posted by Lukezen27 View Post
    Yup

    you need max cat flash with the added displacement to pass emissons and nothings better than OEM

    Mine was added power being turbo but its the same thing
    Max cat flash?? Wtf is dat?? Lol

    U mean a higher CEL rating cat?
    B to BFrank to K .... ive had it ......

  10. #130
    Member Array
    Join Date
    Nov 2004
    Location
    Manly Yo
    Car:
    ED/EG5/EP3/JAZZ
    Quote Originally Posted by IV73CI View Post
    Max cat flash?? Wtf is dat?? Lol

    U mean a higher CEL rating cat?
    means the cat getts hot enough to burn off the extra crap!

    most aftermarked high flow units don't accomplish this
    161.4KW ATW Tuned By TODA
    EG5 JDM B16A SiR-II TURBO

    13.28@106.6mph 2.117 60ft On RE001

  11. #131
    Member Array
    Join Date
    Nov 2010
    Car:
    inb4yursorryass
    So how does one get or achieve this max cat flash??

    Sorry noob to the above
    B to BFrank to K .... ive had it ......

  12. #132
    Member Array
    Join Date
    Nov 2004
    Location
    Manly Yo
    Car:
    ED/EG5/EP3/JAZZ
    Quote Originally Posted by IV73CI View Post
    So how does one get or achieve this max cat flash??

    Sorry noob to the above
    its the quality of the OEM units and the size also makes a difference

    hence why I said to use stock cat and exhaust
    161.4KW ATW Tuned By TODA
    EG5 JDM B16A SiR-II TURBO

    13.28@106.6mph 2.117 60ft On RE001

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.