*** Official - What Did You Do To Your EG Civic Today? ***

[jdmEG5]

^4dlulz

[JDM-BOY]

installed my d15b4/k24a3 frankenstein
http://a7.sphotos.ak.fbcdn.net/hphotos-ak-ash4/254209_2060515646071_1640077132_1996476_5279951_n. jpg


ROFL new hybrid tech
^^

[JDM-BOY]

fixed for you


heheheehe thanks bud........ HOW?

[Sleepy.]

Climate control globes replaced.

[JDM-derek]

short shifter and oil catcher =)

[viinnh]

short shifter and oil catcher =)

when the **** did you own a EG haha

[KillerTofu]

zedzed cant sell old parts, no PQ rep :(

need carpet and more low!!

[oken]

Diy black headlights, dye the carpet and will be doin dash light change tomorrow!

[ogen]

swapped out my eg4 rear sussy for DC2R shocks and lca
+ eg5 sway bar

[EG9]

took a photo....

http://i279.photobucket.com/albums/kk122/slimey_limey/BLOG/EG9-.jpg

[Alexx]

thats a sick sedan! Nice work

[egb16b]

installed foglights.. but they were the shitty ebay ones.. fitment was shocking.. not one bolt lined up to their hole.. fcken regret doing it !!!

and the main relay blew after 5 mins of working..

gonna go with j's racing duct now.. ahhh what a waste of a good bumper.....

[JDM-BOY]

http://img232.imageshack.us/img232/2066/28506010150254414871935.jpg


new rims/ bigger brakes/ coilovers/ camber one happy boi

[viinnh]

nice car, nice seats bro !!!

[JDM-BOY]

nice car, nice seats bro !!!

thanks bud :)

[VT3C]

took a photo....

http://i279.photobucket.com/albums/kk122/slimey_limey/BLOG/EG9-.jpg

wow, i likey !! More pics ?

[sebtoombs]

Repainted wiper arms black. looks way better.

[egb16b]

^^ been meaning to do that for ages ages..

[viinnh]

rego sticker + visor
http://a4.sphotos.ak.fbcdn.net/hphotos-ak-snc6/283106_2099957432091_1640077132_2051403_890720_n.j pg

[euro1986]

Did a wire tuck for front lights, horn, indicator and window washer....

[myztery]

Cleaned the interior, and now trying to pump myself up to strip the dash lol....

[KillerTofu]

http://i824.photobucket.com/albums/zz165/KillerTofuu_/38de2403.jpg

turnedintoracecar

because race car

[Stoogey]

Not racecar yet till you remove sound deadening.

Do eet.

because canthearshitfromroadnoise

[KillerTofu]

http://i824.photobucket.com/albums/zz165/KillerTofuu_/3df4f662.jpg

because i'm a filthy troll.

come@mebro

[lsvtec]

u cant be serious??

[Stoogey]

u cant be serious??

Oh he is very serious.

You should see the rest of his car.

[cnez]

Oh he is very serious.

You should see the rest of his car.

lol. that is all.

[SuperJDM.]

http://www.demotivationalposters.org/image/demotivational-poster/0808/jesus-facepalm-facepalm-jesus-epic-demotivational-poster-1218659828.jpg

http://www.demotivationalposters.org/image/demotivational-poster/0810/facepalm-face-palm-facepalm-demotivational-poster-1223672935.jpg

http://4.bp.blogspot.com/_1qVCj98--pM/TCPiSVbpGrI/AAAAAAAAAFg/R17DsF2XSrk/s1600/facepalm.jpg

[viinnh]

you guys dont realise thats a spare bonnet right ...

[cnez]

i am curious to see how it turns out

[KillerTofu]

main aim of this whole shit was too make internet trolls cry and have a little whinge because they don't like it. challenge accepted.

i win.

i am the internet.

the internet is i.

that is all.

[KillerTofu]

but in srzness.

it is just a spare bonnet that i'm sticker bombing for lols.

[Temp3st]

I think it would look sick! Should clearcoat it after so it keeps the fresh as look

[cnez]

your aim, driving force shouldnt be to make 'internet trolls' cry as such. i'd do it to be different. not follow everyone else, and with that being said thats why i am interested to see how it turns out. im' not crying

[viinnh]

got bored did this. double sided tape plates + badge in oem position.
http://a1.sphotos.ak.fbcdn.net/hphotos-ak-ash4/294266_2110071324932_1640077132_2064322_2745719_n. jpg

[viinnh]

this threads completely dead..
BEFORE - gay cannon
http://a5.sphotos.ak.fbcdn.net/hphotos-ak-snc6/205875_2117035059021_1640077132_2073912_5311215_n. jpg
AFTER - stock muffler !!!!!
http://a2.sphotos.ak.fbcdn.net/hphotos-ak-ash4/297191_2117035339028_1640077132_2073914_7554913_n. jpg

going to polish it when im bothered.

[SuperJDM.]

DC2R tip please

[viinnh]

nah dude, maybe super cheap ones the nice angle cut small ones, or vtir tips angle cut.

[SuperJDM.]

you do know thats what im referring to right?

http://a2.sphotos.ak.fbcdn.net/hphotos-ak-ash4/300015_2117733057548_1072396188_2419103_65595_n.jp g

^

[viinnh]

yeap thats what im refering to as well, VTIR tip :L its bolt on. type r is welded on.

[pooface]

http://i772.photobucket.com/albums/yy3/joshyr/IMG_20110821_205410.jpg

getting rid of the drummmmmmmmmsssss!

[KillerTofu]

lowered

http://i824.photobucket.com/albums/zz165/KillerTofuu_/41316341.jpg

http://i824.photobucket.com/albums/zz165/KillerTofuu_/25659628.jpg

[slow_poke]

Took my front apart!

http://i1083.photobucket.com/albums/j397/sl0w_p0ke/jdm029.jpg
http://i1083.photobucket.com/albums/j397/sl0w_p0ke/jdm030.jpg

[EG9]

Found this in the Osaka Tomica Store yesterday... if only they made an EG9...

http://i279.photobucket.com/albums/kk122/slimey_limey/HCCV/DSC07577.jpg

[jdmEG5]

Took my front apart!

http://i1083.photobucket.com/albums/j397/sl0w_p0ke/jdm029.jpg
http://i1083.photobucket.com/albums/j397/sl0w_p0ke/jdm030.jpg

Is that a 5 stud?? Planning to do an engine conversion?

[slow_poke]

Is that a 5 stud?? Planning to do an engine conversion?


It is a 5 stud and i've got a build thread so i ain't revealing nothing lol

Also nearly done!

http://i1083.photobucket.com/albums/j397/sl0w_p0ke/IMG_3247.jpg

[viinnh]

installed some dc2 vtir seats, rear mudflaps and a spoon wing. got shit phone camera.

[jdmEG5]

It is a 5 stud and i've got a build thread so i ain't revealing nothing lol

Also nearly done!

http://i1083.photobucket.com/albums/j397/sl0w_p0ke/IMG_3247.jpg

OH shit! niceeeeeee :thumbsup: good work! haha

[B18C VVTi]

http://25.media.tumblr.com/tumblr_lqn0ugCDH91qi5suuo1_500.jpg
http://30.media.tumblr.com/tumblr_lqn0ugCDH91qi5suuo2_500.jpg

[dorikin]

Niceee 1 piece

[VT3C]

B18CVVTi: I have the same wing but man yours is in amazing condition - or did you repaint it ?

Swapped my enkeis with almost-semi's over to the EG:

http://i89.photobucket.com/albums/k210/VTEChnique/Bedes%20EG5%202011/BG_EG5_ENKEI_01.jpg


more pics on my thread HERE (http://www.ozhonda.com/forum/showthread.php?60162-Spoonin-up-the-EG.../page15)

[Alexx]

EK front on EG wowsers!

[slow_poke]

EK front on EG wowsers!

I got dc2r interior also.
Just wait for the other things lol

[viinnh]

I got dc2r interior also.
Just wait for the other things lol

shoulda went for a ek dash bro :), looks hot. i might do it if i keep my eg in a few months HAHA


installed some dc2 vtir seats, rear mudflaps and a spoon wing. got shit phone camera.

http://a2.sphotos.ak.fbcdn.net/hphotos-ak-ash4/s720x720/317720_2141594873001_1640077132_2107867_5761571_n. jpg

[kutso]

shoulda went for a ek dash bro :), looks hot. i might do it if i keep my eg in a few months HAHA



http://a2.sphotos.ak.fbcdn.net/hphotos-ak-ash4/s720x720/317720_2141594873001_1640077132_2107867_5761571_n. jpg

whats the fitment like with ek dash into eg? love the spoon wing

[viinnh]

no mods to door trim at all
http://www.ek9.org/forum/builds-projects/3719-ek9-dash-into-my-ickle-eg-project-thing.html
http://img183.imageshack.us/img183/2583/dsc06816za8.jpg
http://www.youtube.com/embed/sxSHhiwZtYY

[slow_poke]

shoulda went for a ek dash bro :), looks hot. i might do it if i keep my eg in a few months HAHA

Not a fan unfortunately, also i got my whole jdm dc2r dash [including climate control, carbon parts] for less than $120 so why not ahhaha

This is my interior a while back, looks more cleaner now.
http://i1083.photobucket.com/albums/j397/sl0w_p0ke/IMG_9274.jpg

[viinnh]

http://a6.sphotos.ak.fbcdn.net/hphotos-ak-snc7/s720x720/321575_2152049534361_1640077132_2122830_3648203_n. jpg

camber kit bro :P...

this thread so dead.

[B18C VVTi]

oem wing
http://24.media.tumblr.com/tumblr_lqtrl4SWmw1qi5suuo1_500.jpg
oem white foggies (sorry if I stole anyone's idea - all credit go to pocket rocket's old ride)
http://25.media.tumblr.com/tumblr_lqzg857Ogy1qi5suuo1_500.jpg

and all the kids are like, "eww it's so...oem as f*ck"

[mocchi]

^ shit is really nice. damn.

[Stoogey]

What did i do to my eg today?


Blew my headgasket, thats what i did....

[jdmEG5]

What did i do to my eg today?


Blew my headgasket, thats what i did....

seriously?

[Stoogey]

seriously?

Yeah bro.

Engines gone.

Am currently driving my uncles corolla in the meantime till i can sort something out, and its gotta be soon as he will need the car.

Sussing out whether a manual and d16y1 swap is worth it.

Can't really get a new car at the moment as i am a typical strapped for cash uni student.


Argh, decisions decisions.

[viinnh]

drUg deal time

[jdmEG5]

Yeah bro.

Engines gone.

Am currently driving my uncles corolla in the meantime till i can sort something out, and its gotta be soon as he will need the car.

Sussing out whether a manual and d16y1 swap is worth it.

Can't really get a new car at the moment as i am a typical strapped for cash uni student.


Argh, decisions decisions.

use the $50 engine u bought off me lmao

[Stoogey]

It's in pieces lol.

Headgasket didn't look good on that thing either when i pulled it apart.

[jdmEG5]

It's in pieces lol.

Headgasket didn't look good on that thing either when i pulled it apart.

of course it didnt after you pulled it apart! LOL cant expect it to be in one piece! :p

oh well! good luck broo!!

[hmetro24]

Lool Head gasket should stay brand new :D.

[jdmEG5]

Lool Head gasket should stay brand new :D.

Not what i've been seeing at work! LOL

[viinnh]

manual + d16y1 .

btw ummm whens your greens ?

[hmetro24]

Not what i've been seeing at work! LOL
I am kidding headgasket exposed to heat, water, oil. So after period of time, it's gonna look bad.

[Stoogey]

manual + d16y1 .

btw ummm whens your greens ?

End of the month bro lol....i know....

So close, yet so far....

[jdm18c]

on the weekend i removed my manifold and resealed it and also replaced my timeing belt,water pump and coolant on my b16a

[viinnh]

installed oem corners, HID, Denji projector headlights and a horn

http://a8.sphotos.ak.fbcdn.net/hphotos-ak-ash4/s720x720/309632_2198410413354_1640077132_2163809_1700678080 _n.jpg
http://a5.sphotos.ak.fbcdn.net/hphotos-ak-ash4/s720x720/302276_2198411133372_1640077132_2163811_107622738_ n.jpg
http://a3.sphotos.ak.fbcdn.net/hphotos-ak-ash4/s720x720/317243_2198410773363_1640077132_2163810_1106051887 _n.jpg

[Temp3st]

Thats sick man look so good! I paid for the first half of my motor package :D

[Vvvtec]

^ b18?

[myztery]

Sand blasted the engine bay of
My new shell

[Temp3st]

Yeah vvvtec, b18 :D paid for the 2nd half today, should be here in the next 2 weeks

[Red_EG4]

installed oem corners, HID, Denji projector headlights and a horn

http://a8.sphotos.ak.fbcdn.net/hphotos-ak-ash4/s720x720/309632_2198410413354_1640077132_2163809_1700678080 _n.jpg
http://a5.sphotos.ak.fbcdn.net/hphotos-ak-ash4/s720x720/302276_2198411133372_1640077132_2163811_107622738_ n.jpg
http://a3.sphotos.ak.fbcdn.net/hphotos-ak-ash4/s720x720/317243_2198410773363_1640077132_2163810_1106051887 _n.jpg

How was the fit of your denji's? did you check the alignment of the projectors?
Mine were pointed to suit a LHD car when I put mine in.

[Vvvtec]

Yeah vvvtec, b18 :D paid for the 2nd half today, should be here in the next 2 weeks

Niiiiiiiiice man! C2 or c7? Doing the conversion yourself?

[viinnh]

How was the fit of your denji's? did you check the alignment of the projectors?
Mine were pointed to suit a LHD car when I put mine in.

my passenger side points a bit to wards peoples houses not to the middle of the car, and drivers side points to the middle , does not blind incoming people. my high beams was just retard shines outwards of the car not to the middle, i adjusted it a bit lower and to wards the middle

EDIT : 501's
http://a1.sphotos.ak.fbcdn.net/hphotos-ak-ash4/s720x720/318952_2201052519405_1640077132_2166380_1590941633 _n.jpg
http://a7.sphotos.ak.fbcdn.net/hphotos-ak-ash4/s720x720/314708_2201234803962_1640077132_2166521_975014513_ n.jpg
http://a5.sphotos.ak.fbcdn.net/hphotos-ak-ash4/s720x720/316521_2201053079419_1640077132_2166382_1571166426 _n.jpg
http://a3.sphotos.ak.fbcdn.net/hphotos-ak-ash4/s720x720/302019_2201053799437_1640077132_2166383_1243496584 _n.jpg

[Temp3st]

Niiiiiiiiice man! C2 or c7? Doing the conversion yourself?

C2, with buddyclub headers, custom exhaust, custom intake, tuned for the entire setup, and yeah we're gonna be doing the conversion ourselves, I'm so excited it hurts! And shit viinnh your EG is porn

[Vvvtec]

Awesome man, gonna be so good! I cant wait to get mine tuned asap!

[Temp3st]

Yeah I cant wait to put the bastard in, gotta sort out mounts timing belt kit water pump and type r shift linkage before it gets here so the fun can begin!

[impossi13le]

got vtec fixed and mugen chipped ecu :D

[Vvvtec]

Notice any gains with the ecu?

Awesome sig btw ;)

[Red_EG4]

EDIT : 501's

What are your wheel and tyre specs?
looks nice :thumbsup:

[viinnh]

What are your wheel and tyre specs?
looks nice :thumbsup:

15x8+15 195/45/15 front are diffrent tyres to the rear, rear are duran more stretch from are some brand lol

and thanks id rather axis og's thought. will get them in a few weeks time ! AXIS OG sans, 15x8+25 with 195/50/15

[Red_EG4]

I sadly did this the other day.

http://i164.photobucket.com/albums/u27/Postie_Boy/IMG_0253.jpg
http://i164.photobucket.com/albums/u27/Postie_Boy/IMG_0254.jpg

[Alexx]

wow, low km eg!

[impossi13le]

Notice any gains with the ecu?

Awesome sig btw ;)

well i only drove it 20 - 30 kms or so, and the fuel's gone. so once i fill up with full tank i can fully suss out this new ecu haha. hope nothing plays up :S

[nigs]

SPOON Rigid Collar Kit, woot! e-peen +++

http://i69.photobucket.com/albums/i55/vteclol/new%20egg/2011-09-19144633.jpg

[myztery]

Started rubbing down the engine bay,

[duzy]

SPOON Rigid Collar Kit, woot! e-peen +++



How much and where did you get it from? Plan on getting a kit aswell

[justinagar]

I just had a carwash. lol could be a bad idea.

[nigs]

How much and where did you get it from? Plan on getting a kit aswell

Straight from Japan.
$201 at the time plus shipping. I have no idea what shipping was.

[89lude]

jdm itr steering wheel s2k cluster and defi's all running now
http://i405.photobucket.com/albums/pp136/divads_87/IMG_2179.jpg
made a panel for batt isolator and defi link controller
http://i405.photobucket.com/albums/pp136/divads_87/IMG_2180.jpg

[Temp3st]

Got the ITR steering rack installed on the EG, turning circle is pretty shithouse but response is amazing!

[riruiz_88]

jdm itr steering wheel s2k cluster and defi's all running now
http://i405.photobucket.com/albums/pp136/divads_87/IMG_2179.jpg

dosnt look like an DC2R steering wheel, no red horn and no red stitching from what i can see. but damn bad ass parts :thumbsup:

[89lude]

it is its a little faded plus shitty phone pics dont bring it up

[zhong]

dosnt look like an DC2R steering wheel, no red horn and no red stitching from what i can see. but damn bad ass parts :thumbsup:

It's the JDM ITR NON-SRS MOMO steering wheel! The one with SRS has the red logo I think..

[hmetro24]

Went to the wrecker to get Seat rails, i get my self something else tanabe g power medallion Catback for 35 $. I will put it and see how good it is. :)

[mocchi]

god damn. thats good buy.

[hmetro24]

god damn. thats good buy.
It's was on Honda prelude, So i have to take it to Exhaust shop to fit my eg. Also saw h22A engine but automatic :|. I want to get it but i do not have money to do the swap.
I can get it for 300$-350$
What the price for installing the exhaust? Anybody??

[12mod]

bought a new daily a black 95 eg4 gli the other week and so far have modified the throttle body and intake for a bit of induction note fixed all the little dings that you would usually find on a car of its age have fitted a set of lowered shocks and springs from my last civic build put a set of xxr522 rims and tyres bought and fitted a type r style front lip fitted my aerotec race buckets and undercoated the whole car except the bonnet now its looking pretty sweet just need to pick a colour to paint it and get a d16y1 head to do a mini me and i will be happy not sure how to post pics up but anybody who lives on the southside of brisbane will see it around

[hmetro24]

Went to a exhaust shop and they told me that this exhaust will fit but it's big compared to oem exhaust. Do you reckon it will be a problem to fit this exhaust. I do not see a big diference compared to the oem exhaust. they want 100$ to fit it.
http://img716.imageshack.us/img716/9342/27092011426.jpg
http://img828.imageshack.us/img828/1278/27092011427.jpg

[zhong]

^^^ $100 is about the right price to fit an exhaust as they would have to modify it slightly... As much as it "looks" the same, it probably hangs on a slightly different angle etc, this can cause many problems.. Ask them what do they have to do to fit it, then bargain them.. haha Exhaust places usually dont' charge much if u know exactly what you want done.

Goodluck man! Sell my your spoiler!

[jeremydawg]

Give the muffler a buff and shine before you put it on... will look the goods!!!

[hmetro24]

I will give it a clean up, before i put it :).

[89lude]

ku36's on the rims
http://i405.photobucket.com/albums/pp136/divads_87/IMG_2217.jpg
walbro 255 fuel pump
http://i405.photobucket.com/albums/pp136/divads_87/IMG_2223.jpg

[Glocker]

Fender braces in. ****ing epic turn in now.
http://img4.imageshack.us/img4/5195/img0500zz.jpg

[nigs]

heh, always wondered if those braces were worth it.

[blastnpast]

They are defiantly worth it on the track :D they are a decent price to not to pocket breaking

[henrygiang]

[QUOTE=89lude;3093867]ku36's on the rims
http://i405.photobucket.com/albums/pp136/divads_87/IMG_2217.jpg

haha i have the exact same setup ~ KU36 rolling on 16" SSR Type C's lol. Awesome setup!

[Glocker]

heh, always wondered if those braces were worth it.

Worth the extra trouble. I reckon they work better than your normal two point strut braces.

[EG CIV]

I just bought a type r integra engine for my beast :) cant wait for the fun conversion :P

[flashcvc]

Installed an engine torque damper for my eg!!! took it for a test drive... happy with the results... $60 from ebay lol

[Tom eg5]

I Installed these suckers..

http://i814.photobucket.com/albums/zz68/Quiksilverpro_asd_1/KSWAP474.jpg

[89lude]

I Installed these suckers..

http://i814.photobucket.com/albums/zz68/Quiksilverpro_asd_1/KSWAP474.jpg

Nice, bobby's old brakes?

[Tom eg5]

Yeah off his old car^

[sebtoombs]

Today I finally got hold of a new driveshaft, re-assembled everything... And went for a drive! Man I've missed driving it

[pooface]

i got a wheel alignment and installed ek4 brakes with ebc pads for Hondanats!

[89lude]

painted me egg jams done
http://i405.photobucket.com/albums/pp136/divads_87/002-2.jpg
outside done
http://i405.photobucket.com/albums/pp136/divads_87/092.jpg
http://i405.photobucket.com/albums/pp136/divads_87/089.jpg

[v__]

**** yea.

nice work divad

[89lude]

**** yea.

nice work divad

cheers man lil nephew help so yeah we smashed it 2 cars on the weekend

[zhong]

painted me egg jams done
http://i405.photobucket.com/albums/pp136/divads_87/002-2.jpg
outside done
http://i405.photobucket.com/albums/pp136/divads_87/092.jpg
http://i405.photobucket.com/albums/pp136/divads_87/089.jpg

Awesome man... 2k paint? looks the shiz.

I converted my b4 carby to b7 efi over the weekend.. never again i'd say.. but thanks heaps to hmetro!!

[Glocker]

Serviced car, find wheel hub ****ed.

****'s ****ed.

[hmetro24]

Awesome man... 2k paint? looks the shiz.

I converted my b4 carby to b7 efi over the weekend.. never again i'd say.. but thanks heaps to hmetro!!
Anytime mate ;), would like to help anyone if they need help.

[nigs]

You'll find me at your local Macca's car park.

http://i69.photobucket.com/albums/i55/vteclol/new%20egg/2011-10-11195131.jpg

[mocchi]

feelin jelly on that sussy hehe. nice nigs.

this happened.
http://i516.photobucket.com/albums/u323/breadbaconncheese/P1020528.jpg

http://i516.photobucket.com/albums/u323/breadbaconncheese/mess.png


so i had to do this
http://i516.photobucket.com/albums/u323/breadbaconncheese/P1020522.jpg

http://i516.photobucket.com/albums/u323/breadbaconncheese/P1020520.jpg

http://i516.photobucket.com/albums/u323/breadbaconncheese/P1020524.jpg

http://i516.photobucket.com/albums/u323/breadbaconncheese/P1020523.jpg

http://i516.photobucket.com/albums/u323/breadbaconncheese/P1020525.jpg

http://i516.photobucket.com/albums/u323/breadbaconncheese/P1020531.jpg

slap em back on and im back rollin'

[Vvvtec]

You'll find me at your local Macca's car park.

http://i69.photobucket.com/albums/i55/vteclol/new%20egg/2011-10-11195131.jpg

Where's the sway bar?

[nigs]

I don't need one........yet.

[Vvvtec]

Haha whats the point of the ASR then?

Nice colour btw, I have the exact same one :)

[Temp3st]

Yeah lol wtf is the point of getting the ASR if you're not gonna run a swaybar? It does nothing other than look good then.

[Tom eg5]

Nigs is a boss he can do what he wants!

[12mod]

if he wants the asr thats his choice and even if it is just for looks at the moment atleast its there for when he puts in the sway bar good luck with the build man keep up the good work

[Vvvtec]

Haha I know, I'm sorry if I came across Abit harsh, didn't mean it that way :thumbsup: :)

[nigs]

It works as a tie bar........or do you only approve of the beaks car? Ha.

[mocchi]

nigs you end up fixing that prop valve leak?
today i cleaned my eg.

[egb16b]

everything back to stock ready for sale.

enter black eg5 awaiting b18c2 conversion =))

[nigs]

Prop valve still broken x3

[hmetro24]

I had a problem with Idle speed, cold start 2100rpm and when it warm up 1200 rpm ( becuase seem the old owner damaged the Tb inside and was leaking air, so i went wrecker picked my self Gsi B18b2 throttle body 60mm, compared to 55mm D16a8 throttle body. It feel better, better response, feel like more air. Now it start and idle just perfect ;)
http://img511.imageshack.us/img511/7658/15102011430.jpg (http://imageshack.us/photo/my-images/511/15102011430.jpg/)

Uploaded with ImageShack.us (http://imageshack.us)

[whitecomet07]

did computerised wheel alignment front and back today. :) $50 in granville. very friendly and efficient service.
http://i278.photobucket.com/albums/kk118/chuku023/DSC00617.jpg

[whitecomet07]

well not really today, but im planning to write a DIY on this. i fitted a 5'1/2 sony speakers into a EG6 Gather speaker brackets.. then i made the Gather speaker covers fitted onto my original speaker covers.
http://i278.photobucket.com/albums/kk118/chuku023/IMG_1029.jpg
http://i278.photobucket.com/albums/kk118/chuku023/IMG_1077.jpg
http://i278.photobucket.com/albums/kk118/chuku023/IMG_1070.jpg

[PGB]

3/4 of the way into finally completing the hatch nose on my sedan. This guards all welded up now. Just like this pic because the gaps are mint. Fingers crossed I can get Hi Fill to it tomorrow and new colour under the bonnet. Also had aspirations to polish two outer rims. That plan isnt looking so crash hot lol

http://i874.photobucket.com/albums/ab310/swiftaddiction/EG%20Front%20Conversion%20-%20Sedan%20to%20Hatchback/eHatchbackGuardCutFineTuningGaps05.jpg

[Alexx]

Some cool stuff happening in this thread lately, nice!

[Red_EG4]

3/4 of the way into finally completing the hatch nose on my sedan. This guards all welded up now. Just like this pic because the gaps are mint. Fingers crossed I can get Hi Fill to it tomorrow and new colour under the bonnet. Also had aspirations to polish two outer rims. That plan isnt looking so crash hot lol

http://i874.photobucket.com/albums/ab310/swiftaddiction/EG%20Front%20Conversion%20-%20Sedan%20to%20Hatchback/eHatchbackGuardCutFineTuningGaps05.jpg
great choice, will look good

[whitecomet07]

its a nice warm sunday afternoon, good time to start my other project before the nz vs oz rugby world cup.
http://i278.photobucket.com/albums/kk118/chuku023/DSC00666.jpg

[nigs]

<3 this steering wheel.

multi-forum pimping it.

http://i69.photobucket.com/albums/i55/vteclol/new%20egg/2011-10-16173006.jpg

[89lude]

s2k cluster popping up everywhere now dam

[whitecomet07]

s2k cluster popping up everywhere now dam

:( it did took me 18 months to find the parts i want with the right price (i travelled to nz twice)... and the courage to rip apart my oem cluster wires and made them into a plug and play s2k wires. not to mention i also have to fabricate my own bezel to fit.

[nigs]

Spoon brakes Tom! You has another civic?

[impossi13le]

put 2.25" catback on it :D

[hmetro24]

Put dc2 seats in my eg.

[PGB]

Few little odds and ends this week after last weeks effort. Finally got around to giving the radiator support a bit of a knock to bring the bonnet down. Its gapped up tidy as now and ready to call the hatchback front conversion complete.
http://i874.photobucket.com/albums/ab310/swiftaddiction/EG%20Front%20Conversion%20-%20Sedan%20to%20Hatchback/Gappedupconversion.jpg

Also got the recoated bolts in the Simmons I'm in the middle of cleaning up. I 'assumed' they were stainless and machine brushed them. rusted within a week of fitting them up :( The two completed wheels are both done now and I can send the rest of the bolts to the platers Monday.
http://i874.photobucket.com/albums/ab310/swiftaddiction/OM16%20Simmons%20Restoration/RechromedOM16bolts.jpg

Small repairs to the front lip and side skirts tomorrow then fingers crossed I can get some booth time at work for next Saturday.

[nigs]

**** yeah, Simmons!
Good to see ppl still rock them.
AFAIK, they went under?

[PGB]

Closed down and have been for a while. From memory I think Tempe bought it out? and will be making 17 inch and up

They aren't the worlds best by any means by I love 'em. Probably residual feeling from my childhood lol

[zhong]

That's a tight az front man... tight tight!

[viinnh]

BEFORE
http://a7.sphotos.ak.fbcdn.net/hphotos-ak-ash4/303006_2324036553929_1640077132_2258345_982815097_ n.jpg
AFTER
http://a5.sphotos.ak.fbcdn.net/hphotos-ak-ash4/306440_2324036833936_1640077132_2258346_1785682958 _n.jpg

genuine vision mirrors :)\

just needs some rims :/

[blastnpast]

BEFORE
http://a7.sphotos.ak.fbcdn.net/hphotos-ak-ash4/303006_2324036553929_1640077132_2258345_982815097_ n.jpg
AFTER
http://a5.sphotos.ak.fbcdn.net/hphotos-ak-ash4/306440_2324036833936_1640077132_2258346_1785682958 _n.jpg

genuine vision mirrors :)\

just needs some rims :/ and K24

Needs.. More.. Racecar! ;P

[Riced_Civic]

wow i almost didnt even notice in the last pic cos it was suck bad quality

nice pik up on the visions

[egb16b]

the visions look like they sit up on an angle.. is it the pic orr .. ?

nice find either way.

[viinnh]

you can move the vision mirrors cos theres a ball joint. just put it sticking up because i wanted to be usdm for a few mins :( took it off anyways shit as vision cant see shit all on the passenger side its just too small.

[PGB]

:thumbsup: Those mirrors are wild. Pity they are functional enough for you.
I decided not to paint my car this week. Been buggered all week and wanted a rest...right :rolleyes: Ended up tearing my garage apart to build a new bench and finally sourced some amber paint. It's a bit bright and will hopefully look better with one or two coats of tint. See how they look with the car painted first.
http://i874.photobucket.com/albums/ab310/swiftaddiction/EG%20Front%20Conversion%20-%20Sedan%20to%20Hatchback/DSC03239.jpg
:/ Just noticed they appear really unevenly painted in the pic but they look fine to stand and look at them.

[viinnh]

dude your paint job atm looks pretty hot lol, and im being seroius looks nice for somereason

[PGB]

Heh cheers man. Mt Druitt Racing Grey is cool, until your stuck with it lol At least the whole car is in primer now except the roof. Driving patchy sucks balls. Hopefully this time next week I'll be putting it all back together Jet Black :)

[viinnh]

the patchy bits look nice with the primer haha

[mocchi]

true patchy bits looks good.
nice number plate too. fcuk da police im running 16s.

[PGB]

Haha I thought they were more subtle than that :o You were close. The 6 is a poor attempt at a 'G'

[viinnh]

true patchy bits looks good.
Nice number plate too. fcuk da police im running 16s.

fdp16s
f d pigs !!!!!!!

[SuperJDM.]

lmfao F D PIGS is goodaz

[mocchi]

lolol i knew that.

http://www.ozhonda.com/forum/customavatars/avatar11984_7.gif

[jeremydawg]

i sold mine

[myztery]

Just had the new shell prepped and ready for motor Installation...

[viinnh]

is that that bmw gold ? what motor

[jeremydawg]

Just had the new shell prepped and ready for motor Installation...

thats gold! ...get it!?

srs though thats awesome

[hmetro24]

I was looking at my front tyres and noticed inner wear, pretty bad. So i changed the front tyres to used tyres and balanced with alignment for 110$. The front had too much toe :|
http://img502.imageshack.us/img502/8780/10112011486.jpg

[na-118]

rob that's a sick paint job,,

[impossi13le]

wow hmetro thats so much toe!

was the wheel alignment done by a beissbarth machine? i have one at work :L

back to the topic - i put new rims on mine! :D

[myztery]

is that that bmw gold ? what motor

Urban titanium

[myztery]

thats gold! ...get it!?

srs though thats awesome

Lol...
God I miss league lol...

Thanks

[hmetro24]

wow hmetro thats so much toe!

was the wheel alignment done by a beissbarth machine? i have one at work :L

back to the topic - i put new rims on mine! :D
yes it is beissbarth machine, Is it bad machines ?
Yeah that was too much toe. tyre wear out lesss than 1500km(not brand new around 50% tread) hope its better now

[impossi13le]

yes it is beissbarth machine, Is it bad machines ?
Yeah that was too much toe. tyre wear out lesss than 1500km(not brand new around 50% tread) hope its better now

well i cant say about the one that you used, but the one at my work plays up often. still, better than having your tyres wearing out so much i guess :)

[hmetro24]

http://img208.imageshack.us/img208/5690/13112011491.jpg (http://imageshack.us/photo/my-images/208/13112011491.jpg/)

Uploaded with ImageShack.us (http://imageshack.us)
Something i did to my intake. Not sure how it is working. I am waiting for Hot weather to see.

[dorikin]

Cleaned Sunroof rails

http://img828.imageshack.us/img828/7878/img0061wk.jpg

http://www.ozhonda.com/forum/showthread.php?157531-EG-How-to-clean-Sunroof-rails-tracks&p=3148552#post3148552

[89lude]

made up a solid mount rear mount and installed it
before
http://i405.photobucket.com/albums/pp136/divads_87/IMG_2066.jpg
after
http://i405.photobucket.com/albums/pp136/divads_87/IMG_2068.jpg

[Temp3st]

Finished swapping the B series into my EG, what a bastard of a job

[hmetro24]

Finished swapping the B series into my EG, what a bastard of a job
IS to carbie eg or efi ?
If it's EFI, so not hard, but carbie is pain in the ass ;).

[na-118]

i've done 6 carby to efi conversion it's not as bad as people put it out,, if you were keen as mustard 2 people would take about 7 hours.. with right parts and right tools ..

[hmetro24]

i've done 6 carby to efi conversion it's not as bad as people put it out,, if you were keen as mustard 2 people would take about 7 hours.. with right parts and right tools ..
it is not hard at all, it's just take everything apart and put new stuff in. you can drop B series in eg in 3-4 hours.

[na-118]

had some time during the weekend to remove power steering assy, torque mounts on driver and passenger side, also heater box and blower setup,

http://img593.imageshack.us/img593/2193/38530110150395902983482.jpg (http://imageshack.us/photo/my-images/593/38530110150395902983482.jpg/) Uploaded with ImageShack.us (http://imageshack.us)

http://img339.imageshack.us/img339/7811/38506910150397881938482.jpg (http://imageshack.us/photo/my-images/339/38506910150397881938482.jpg/) Uploaded with ImageShack.us (http://imageshack.us)

http://img534.imageshack.us/img534/2444/30208210150385566503482.jpg (http://imageshack.us/photo/my-images/534/30208210150385566503482.jpg/) Uploaded with ImageShack.us (http://imageshack.us)

also purchased block off plugs to blank up the existing heater hoses from motor.

[hmetro24]

had some time during the weekend to remove power steering assy, torque mounts on driver and passenger side, also heater box and blower setup,

you took the power steering off. how does it feel with out one. Have your tried putting air breather for the power steering. I Am not into power steering anymore, the car feel like a toy with PS.

[na-118]

hey man,, i have driven damienm egk24 which operates without power assist feels much better in a track car,
i have driven cars without power assisted steering for many years, it's not hard just over exxagerated for some people,

i haven't looped the lines or put a breather, but i think i'll be putting fluid in the rack bleeding the manual rak up and looping the lines,,

[89lude]

also purchased block off plugs to blank up the existing heater hoses from motor.
didnt have to buy them man could of went to wreakers or if u had spare head like me you can undo it and use it as the block off
Remove the water outlet in the the head (use a socket or ring spanner, not a shifter)
Replace water fitting with B-Series rocker shaft plug
-10mm allen drive found is 3 places on B-series vtec head - 2 cam belt end, 1 dissy end
These plugs share the same fine thread as the water outlet in the head so is/are a direct replacment that neatly solves the head side of the issue.

[na-118]

hey dave have you got pics? it was only 4 bucks but if it looks neater why not cheers

[89lude]

sure do
before
http://i405.photobucket.com/albums/pp136/divads_87/IMG_2220.jpg
after
http://i405.photobucket.com/albums/pp136/divads_87/IMG_2221.jpg

[na-118]

cheers dave that's heaps neater

i'll find a spare head or head off to wreckers and i'll find them bungs very neat thanks heaps,

[nigs]

Wow WTF?

You make that insert?


made up a solid mount rear mount and installed it
before
http://i405.photobucket.com/albums/pp136/divads_87/IMG_2066.jpg
after
http://i405.photobucket.com/albums/pp136/divads_87/IMG_2068.jpg

[89lude]

Wow WTF?

You make that insert?

yea sure did at work pretty quite now

[viinnh]

listed my car for sale

[mocchi]

replaced shifter arm shaft, selector and mtec springs for dat crispiness

http://i3.photobucket.com/albums/y97/ayla85/P1020572.jpg

http://i3.photobucket.com/albums/y97/ayla85/P1020575.jpg






cheers.

http://i3.photobucket.com/albums/y97/ayla85/P1020571.jpg

[viinnh]

http://i3.photobucket.com/albums/y97/ayla85/P1020571.jpg

if only bonnets had that texture lol

[viinnh]

http://a5.sphotos.ak.fbcdn.net/hphotos-ak-snc7/s720x720/388755_2406054124317_1640077132_2308207_557476300_ n.jpg
put car onto steelies

[charliebrown]

Picked up my EG! :D

Can't drive stick yet though so it's sitting furthest in the driveway :(

http://img4.imageshack.us/img4/6406/20111117170530r.jpg

[egb16b]

haha mr charliebrown picked up the eg. how is it?

can't drive manual?? hope your clutch has lots of meat left on it.

[charliebrown]

Stalled 3 times trying to move the car forward 1 metre. Ended up getting someone to push the car looooool

[viinnh]

^^^^^^^ let go of the clutch slowly, clutch only very slow and youll feel at one point which will be your fiction point the car will move really slow and the idle will drop, tap the accelrator to about 1.5k rpm to balance it and let go of the clutch slowly. youll get use to it

[Tekkenforce]

haha vinh i like the look of your car on steelies compared to the em1 rims lol

[charliebrown]

viinnh, what tail lights are those with the clear corners? Is it USDM or EG6 or something? My car will look pretty similar to that soon. What are you lowered on?

[egb16b]

^^^^^^^ let go of the clutch slowly, clutch only very slow and youll feel at one point which will be your fiction point the car will move really slow and the idle will drop, tap the accelrator to about 1.5k rpm to balance it and let go of the clutch slowly. youll get use to it

yeah do that ^^ you'll get the hang of it.

if not i'll teach you.. just give me your dc4 for payment =)

[viinnh]

haha vinh i like the look of your car on steelies compared to the em1 rims lol
yeah hard lol that clean look.


viinnh, what tail lights are those with the clear corners? Is it USDM or EG6 or something? My car will look pretty similar to that soon. What are you lowered on?
its USDM taillights you can get from jdmyard. ebay ones look chat.
im lowered on custom springs

[Glocker]

installed radiator, radiator upper host, new thermostat, new coolant, type r steering rack, air conditioning, new wheel hub, steering alignment at heasmans...

STILL COULDNT MAKE IT TO THE LAST SOTS AT WAKEFIELD PARK.

****ing fail.

[Bludger]

installed radiator, radiator upper host, new thermostat, new coolant, type r steering rack, air conditioning, new wheel hub, steering alignment at heasmans...

STILL COULDNT MAKE IT TO THE LAST SOTS AT WAKEFIELD PARK.

****ing fail.
how is it now?

[Glocker]

how is it now?

temp gauge goes up when going up hill at low speeds

[na-118]

how's your radiator cap? and hoses? is it using coolant? is it leaking coolant?

[Glocker]

how's your radiator cap? and hoses? is it using coolant? is it leaking coolant?

Buddyclub cap, 1.3kpa, top hose changed bottom hose fine (my set didn't work). Coolant is fine now. I think there's some air still trapped in there because i didn't jack the front of my car up while doing the 'let-radiator-kick-in-twice' bleeding procedure.

[na-118]

no need,, just leave radiator cap undone ,, wait till thermostat kicks in and top up coolant if neccessary repeat process if required

[Glocker]

no need,, just leave radiator cap undone ,, wait till thermostat kicks in and top up coolant if neccessary repeat process if required

So redo the bleeding procedure? I'll just park up a slope and do it just in case. Also, my driver's side door latch actuator shat itself. **** my life.

[na-118]

yeah redo bleeding procedure,, you can also use the bleed nipple if you don't wana do radiator cap styles,,


park on slope why can't you do even surface?

[Glocker]

park on slope equivalent to jacking front of car up lol. I did the last air bleeding on pretty even ground so I just wanna make sure this time.

[na-118]

but why would you need to jack vehicle up?

[Glocker]

My reasoning is that car only heats when at constant rpm/load going up the hill, therefore the air pockets will start to collect at the top of the radiator blocking coolant from cycling through the radiator system. I think that may be the cause of my previous engine's demise...going up the hills at newy freeway, over heat, top hose burst, probably from all the pressure of the coolant trying to force itself into the radiator. Also, air lighter than coolant, easier to escape if radiator filler neck is the highest point of the car.

[na-118]

ohkay might be something new,,

i've been in the trade for 5 years,, obviously don't know it all, but yeah

never done it that way,, i work on light commercial heavy and mining equipment generators etc,,
cheers

[Bludger]

don't bother, you got BHG.

[Bludger]

but why would you need to jack vehicle up?
I told him to jack the front up so all the air will come out.

not necessary, but he has problems and he is trying to eliminate what isn't wrong. jacking it up is fail proof.

[na-118]

fair enough man,, keep that in mind, just incase for future diagnoses cheers bludger u d man

[Glocker]

No bubbles. But!!!! I noticed it took forever for the fan to drop the temps, even switching the heater on works better. Is my fan spinning the wrong way?????

[viinnh]

http://a3.sphotos.ak.fbcdn.net/hphotos-ak-ash4/316689_2421494430315_1640077132_2312980_310352998_ n.jpg
took this photo of it going away

[EKVTIR-T]

Congrats mate

$4k for a 92 d series eg ,nice going :thumbsup:

[viinnh]

3.4^^

[Glocker]

3.4^^

Vti? 10char

[Bludger]

No bubbles. But!!!! I noticed it took forever for the fan to drop the temps, even switching the heater on works better. Is my fan spinning the wrong way?????
which way is it spinning. Should be drawing air from front to back.

@ a stand still, shouldn't matter.

If you're having that much trouble, it's not bubbles or anything small, it's definitely BHG imo.

[Glocker]

which way is it spinning. Should be drawing air from front to back.

@ a stand still, shouldn't matter.

If you're having that much trouble, it's not bubbles or anything small, it's definitely BHG imo.

Fan has blue and red wires, my plug from the OEM fan has black wire and a blue one with a black stripe down the centre. I soldered the blue to the blue and black to the red.

[Bludger]

just look at the fins and see if it's spinning the right way..

[Glocker]

Couldn't tell which direction. Just rewired it now, going for a test run. So far so good, lots quieter than before.

[Glocker]

http://memegenerator.net/cache/instances/400x/11/11268/11538627.jpg

[na-118]

if it was using water it would be, but seems alright

[charliebrown]

Took out the intake resonator today, but now my fender lining is all ****ed up! Was bending it out of the way to get to screws and shit. Anyone know how to fix this? There's no screws that holds that part in

http://img831.imageshack.us/img831/5841/20111120173950.jpg

http://img24.imageshack.us/img24/5373/20111120173940.jpg

[whitecomet07]

that part just get tucked in. all you need to do is push it back behind the bumper... no screw needed.

[charliebrown]

I tried tucking it in for ages, stubborn piece of shit just won't tuck :(

[whitecomet07]

pull the bumper outwards. then bend the liner. push it back in. or... use a flathead screw driver lever it in. make sure you have a cloth on the head so it doesnt scratch.

[B18C VVTi]

I found that there's a way to do it for mine. Try inserting the top corner first cause its slightly more flexible. Once you get an edge in, the rest should be easy to push in. Don't try to push the entire edge in at once though.

[na-118]

how much kws did you gan removing it?

[Glocker]

**** it just take it out. i did it to my left side because it started scraping after a drive through the north side hills.

[charliebrown]

how much kws did you gan removing it?

A lot! Nah i haven't driven it cos the oil level is below minimum and oil light is coming on fuarkk wanted to hear some SOHC VTEC YO

[89lude]

did this today stripped it for 2012 bigger and better plans
before
http://i405.photobucket.com/albums/pp136/divads_87/320653_240805012651180_231203773611304_705072_2135 922325_n.jpg
after
http://i405.photobucket.com/albums/pp136/divads_87/IMG_2284.jpg
a teaser whats going in
http://i405.photobucket.com/albums/pp136/divads_87/IMG_2288.jpg

[hmetro24]

Very nice car mate, specs ?

[89lude]

well it was a b16a afi gt35r turbo 186kw on 7.5 psi new setup is k24 afi gt35r should be all done by jan ish

[Vvvtec]

A lot! Nah i haven't driven it cos the oil level is below minimum and oil light is coming on fuarkk wanted to hear some SOHC VTEC YO

lol your not gonna hear or feel shit man

[charliebrown]

lol your not gonna hear or feel shit man

Sarcasm does not convey well on the interwebz :/