Printable View
where can you get those crimping pins (female spade connector) to connect the wires up to the harness?
somewhere like jaycar or anything local?
and you know what size they are as, jaycar provides only 6.4 and 4.8mm ones which i think are a bit too big for the harness.
do you think these phone female spades would work from jaycar PT. NO. PT4520
please advise thanks. daz
why dont you just buy the harness that EuroSteve posted? thats what i did... just waiting to buy a double-din unit.
i bought the single din unit from ryda that came with the harness.
i just need to get some mobile female spade clips to install some of the wires into the socket.
how many do you need?
the harness has 1 end male + other end is female. <--- came connected
the side with the female i need to connect the wiring up, when i do connect it up i will combine it with my HU harness.
connection would be connected something like this
stock headunit > facia harness + bridged to Aftermarket harness > stock connection
just havent had time to tackle this + need to get some of those connectors.
Hi EuroSteve ,Quote:
Originally Posted by EuroSteve
I am in the process of buying all the part to install my New Pioneer Double DIN DVD . My part shopping list including
1. Double DIn Kit from Face Kit from Honda - 08B06-SDE-700
2. Pioneer AVH-6050 Double Din DVD Player
3. Pioneer Sound to Honda AUX Cable - Car2AUX-HON1
4. Male and Female socket that i got from your link to ebay seller .
Plan A : The diagram is : Pioneer HU ---> Honda AUX -----> OEM Speaker ( This way i can keep the OEM Steering Wheel control . i will add a amp + sub so Pioneer HU will go direct to AMP and SUB at the back .
Plan B : Pioneer HU go straight to OEM Speaker ( to get better sound quality from OEM Speaker ) . Do i still need to buy cable number 3 from my shopping list ? Can i keep the steering wheel volume control if i connect this way as i can see you connect up your Car Computer Infill G4 in other thread and connect your speaker straight from there . If you manage to get it done what pin and cable i need to connect .
Thanks
Hi Mate,
Here's my setup. I will be installing a 7" all-in-one double din unit. What I currently have is the stock head-unit with the honda ipod adapter. I plan to keep all these so this is what I'm doing.
[Factory Cable]
|
|___[To factory headunit]
|
\__[To new headunit]
I bought the following:
- 1 x Honda Double DIN Fascia kit
- 2 x Female Harness
- 2 x Male Harness
- 1 x 7" All-In-One Unit (awaiting arrival)
The above will allow me to retain the standard steering wheel controls with the above connections, connect the aftermarket stereo to the OEM speakers. I needed to order a pair of each harness because the harness you get from ebay is missing some pins, check EuroSteve's previous post.
If you are going to connect your new headunit to an amp then you will not need the speaker cables, you can then recycle those pins/cables for the steering wheel control.
Hope that helped?
Hi QD ,Quote:
Originally Posted by .QD
I will connect 4 OEM speaker straight to my new headunits and sub output will go to Mono AMP to power the sub . I don't think my new Pioneer headunit have any wire for the volume control ? It only have power calbe ( black , red , yellow ) 8 calbe ( 4 pairs of speaker ) and a blue cable called System Remote control .
Not sure where to connect the follow pin from Honda . As far as i understand Steer wheel volume control only control the volume come out from OEM unit is that right ?
3: Steering Wheel Controls +ive.
11: Steering Wheel Controls Ground
Thanks
I am in the process of install my new Pioneer Double Din DVD System to the Euro . I did following this pins out number and connect following wire from my PIoneerQuote:
Originally Posted by EuroSteve
Yellow Cable ( Say Battery ) to 10 : +12V
Red Cable ( ACC ) to 2 : Ign / Switched +12V
Black ( Ground ) to 20 : Ground
When i hook up the new headunit power doesn't come up . if i took the cable out and hook it again to OEM Heahunit it working fine . What did i do wrong here ? Please help .
so u have -----[car oem harness] --> [pioneeer] = no power?
but ------[car oem harness] ---> [stock stereo] = works fine?
Problem solved . went to Jaycar to buy Voltage Meter to check the cable . I got the pins out number another way around .Quote:
Originally Posted by .QD
I thought it was Red and Yellow i need to connect it to turn out to be White and Red on the OEM Harness .
By the way QD , did you manage to get Steering wheels volume control to work with new system ?
nah, steering wheel interface is not compatible with the Euro steering wheel. You can get an aftermarket interface though. I posted on another thread.