Quote Originally Posted by .QD View Post
Hi EuroSteve,

Thanks for the links, was just wondering if you had to add extra pin/cable into the harness to make up for the missing pin/connector/cable to retain stock connectivity to the stock head unit?

If Im reading the pins right and the picture of the connector. Looks like the connector will not connect back the sterring wheel controls or part of it?

Just need to make sure so I can buy double of everything and remove some pins/cable from the connector to the harness that has missing pins/connector/cable so all funtionality of the factory HU is retained.

Thanks.
Ahh yes, I forgot about that. For some reason, the harnesses I bought off eBay don't come fully populated with pins. Because I had no need for the speaker out from the HU, I used those pins to populate the missing ones that I needed.

Yeah, if you need to populate the whole connector, buying two, and using the pins from the 2nd one would be the best option.

You'll need a small "jewelers type" flat blade screw driver to remove the pins from the connector.

HTH

S.