Quote Originally Posted by EuroSteve View Post
Sorry for the late reply.

I bought the male and female harnesses from eBay and soldered up the complete harness myself.

http://cgi.ebay.com.au/ws/eBayISAPI....B:EOIBSA:AU:31
http://cgi.ebay.com.au/ws/eBayISAPI....B:EOIBSA:AU:31

S.
Hi EuroSteve,

Thanks for the links, was just wondering if you had to add extra pin/cable into the harness to make up for the missing pin/connector/cable to retain stock connectivity to the stock head unit?

If Im reading the pins right and the picture of the connector. Looks like the connector will not connect back the sterring wheel controls or part of it?

Just need to make sure so I can buy double of everything and remove some pins/cable from the connector to the harness that has missing pins/connector/cable so all funtionality of the factory HU is retained.

Thanks.