any tips removing wheel nuts that wont come out

You do realise 1/2 breaker bars aren't very expensive... you'd spend like what? $50 for a kinchrome one maybe? just get one of them, and slip the pipe over the end, and use the extra length... We had to undo the wheel bearing nuts on one of the corollas at school, and that thing was stuck something chronic. we used the breaker bar and some exhaust pipe, and after some leverage, it came undone :D
The breaker bar with the length of pipe on it should work, provided the pipe doesn't bend... Seriously, it won't cost that much

kincrome is abt 70-80 bucks for the long ones
really good investment

Quote:

---

Originally Posted by Drifter995

You do realise 1/2 breaker bars aren't very expensive... you'd spend like what? $50 for a kinchrome one maybe? just get one of them, and slip the pipe over the end, and use the extra length... We had to undo the wheel bearing nuts on one of the corollas at school, and that thing was stuck something chronic. we used the breaker bar and some exhaust pipe, and after some leverage, it came undone :D
The breaker bar with the length of pipe on it should work, provided the pipe doesn't bend... Seriously, it won't cost that much

---

also gotta remember that shocking something loose will always work better than brute force, thats why rattle guns are so efffective :)

Quote:

---

Originally Posted by mocchi

kincrome is abt 70-80 bucks for the long ones
really good investment

---

I find sliding T handle stronger than breaker bars.

http://www.sidchrome.com.au/image.as...ducts/2565.JPG

Quote:

---

Originally Posted by Bludger

I find sliding T handle stronger than breaker bars.

http://www.sidchrome.com.au/image.as...ducts/2565.JPG

---

i have one of these it undoes my wheel nuts every time even if the guys at bridgestone used a rattle gun. just put it on and boot it (try not to miss otherwise you will be in pain)
plus its good because after you crack the nut initially u can slide the bar to the middle and just twirl it off between your fingers.


either way we should give up on this until OP gets back to us.

go to markets buy a 30 dollar one, over the last 5 years it hasn't let me down probably use it on bigger shit then you ****s will ever LOL

Quote:

---

Originally Posted by gach2

^^ can someone please explain about this freeze n release technique
explain it to me a noob as i have no idea about how to do this
thanks

---

heat expands metal
cold contarcts metal
the stud is made from different metal than the wheel nut
different metals expand and contract at different rates either hot or cold
the difference in rate is what we are trying to achieve to make the nut loose
do wee freez the wheel stud and hope it contracts quicker than the nut and comes loose
or do we heat the wheel nut and hope it expands quicker than the stud and comes loose
if its cross threaded u can forcefully un thread it using heat or cold to asisst too hot and the nut will melt or round off then you cant unscrew it
to cold as in imposibly cold cyrogenically ****en frozen and the nut will shatter like an ice cube along with anything frozen with it
ive found that in moey dont worrys back yard on a sunday that a propane can of lighter fluid gets the stud cold enough if you stub the nozzle on the stud untill u see the lighter fluid make it frosty unless your a profesional and can use the oxy
do u have an oxy
do you no how to light and an oxy
is ur oxy tip for cutting or heating
do you have the skill to heat the nut and not melt it
do you have the skill and a quality socket to not round off the nut as its become softer with heat
pm me if u need asistance with technique

Quote:

---

Originally Posted by na-118

eg2nv i'm a heavy vehicle/ plant mechanic, sometimes, theres really only one way left of doing it,

i guess your workshop manuals and diys don't help much with experience in the industry

---

Lookout, we got a badass over here...


Why all the hate on eg52nv?????

Quote:

---

Originally Posted by Lanzamus

Lookout, we got a badass over here...


Why all the hate on eg52nv?????

---

cos faggotry and he knows it.

That's not really nice nor called for

Quote:

---

Originally Posted by Lanzamus

That's not really nice nor called for

---

http://a1.sphotos.ak.fbcdn.net/hphot...58379629_n.jpg

Quote:

---

Originally Posted by Lanzamus

That's not really nice nor called for

---

you should stay out if you don't know the full story.