EP3 Type R

Printable View

Show 80 post(s) from this thread on one page

14-11-2009, 03:52 PM
Mugen_B16B

Quote:

Originally Posted by SuperSteve

Wow boys. Was in a Evo 10 Mr and man I was impressed

hahaha someone is tempted to the dark side :p
14-11-2009, 04:25 PM
wtfhax

Quote:

Originally Posted by Twest

So now his statement to the police is that I rearended him, the police have my statement and it is a pending investigation, they want to believe me but the conflicting stories i.e have to presented to their Sargent.

WTF @ your story :eek::thumbdwn:. What a total fkwit.

Weren't there any witnesses/other cars around that could back your story up to the cops?
14-11-2009, 04:42 PM
pair08

Quote:

Originally Posted by Twest

You guys would never guess what happened to me today on parramatta road.

I was in the middlane lane travelling up parramatta road (near the supercheap auto) i was going to IMG to get some wipers of gavin. THis absolute fuc**** idiot over takes me in the right hand turning lane speeds infront of me, this was at the lights and they had turned red, i can see him in the drivers seat flailing his arms.....he puts it in reverse and floors it into my car. He gets off the car and says 'Sorry my fault, i though i was parking' ..OHHH YEA!...parking in the middle of the road?

His Towball goes straight through my bumper and demolished my radiator, front bumper is goooonneee....the mugen lip is ok, small crack where it joins onto the bumper.

Worst roadrage incident i have ever experienced. Worst part is when my mum started calling the cops, because she was in the car he started getting all pissed off then he says 'If your going to call the police YOU HIT ME'....'I dont need to be nice..blah blah'
So now his statement to the police is that I rearended him, the police have my statement and it is a pending investigation, they want to believe me but the conflicting stories i.e have to presented to their Sargent. Absolutely pissed off i am......

The most uneccessary incident i have every witnessed/been a part of.

ouch :eek:, hope you clear it up mate
14-11-2009, 05:20 PM
pair08

also i think this may have been mentioned before but anyone have any opinions of the kiddracing header from the usa?
14-11-2009, 06:37 PM
jonske

got my O2 sensor installed today, worked fine (Denso #234-9004, about $170 AUD from ebay), no more crappy engine light :D
14-11-2009, 08:15 PM
Jibz

Quote:

Originally Posted by Twest

You guys would never guess what happened to me today on parramatta road.

I was in the middlane lane travelling up parramatta road (near the supercheap auto) i was going to IMG to get some wipers of gavin. THis absolute fuc**** idiot over takes me in the right hand turning lane speeds infront of me, this was at the lights and they had turned red, i can see him in the drivers seat flailing his arms.....he puts it in reverse and floors it into my car. He gets off the car and says 'Sorry my fault, i though i was parking' ..OHHH YEA!...parking in the middle of the road?

His Towball goes straight through my bumper and demolished my radiator, front bumper is goooonneee....the mugen lip is ok, small crack where it joins onto the bumper.

Worst roadrage incident i have ever experienced. Worst part is when my mum started calling the cops, because she was in the car he started getting all pissed off then he says 'If your going to call the police YOU HIT ME'....'I dont need to be nice..blah blah'
So now his statement to the police is that I rearended him, the police have my statement and it is a pending investigation, they want to believe me but the conflicting stories i.e have to presented to their Sargent. Absolutely pissed off i am......

The most uneccessary incident i have every witnessed/been a part of.

wow, damn. just out of curiosity what was he driving and what could have provoked him to have done this? had you been driving alongside him up till that point or were you already slowing for the light, then he did his thing?
14-11-2009, 08:59 PM
blk_shadow

Quote:

Originally Posted by Twest

You guys would never guess what happened to me today on parramatta road.

I was in the middlane lane travelling up parramatta road (near the supercheap auto) i was going to IMG to get some wipers of gavin. THis absolute fuc**** idiot over takes me in the right hand turning lane speeds infront of me, this was at the lights and they had turned red, i can see him in the drivers seat flailing his arms.....he puts it in reverse and floors it into my car. He gets off the car and says 'Sorry my fault, i though i was parking' ..OHHH YEA!...parking in the middle of the road?

His Towball goes straight through my bumper and demolished my radiator, front bumper is goooonneee....the mugen lip is ok, small crack where it joins onto the bumper.

Worst roadrage incident i have ever experienced. Worst part is when my mum started calling the cops, because she was in the car he started getting all pissed off then he says 'If your going to call the police YOU HIT ME'....'I dont need to be nice..blah blah'
So now his statement to the police is that I rearended him, the police have my statement and it is a pending investigation, they want to believe me but the conflicting stories i.e have to presented to their Sargent. Absolutely pissed off i am......

The most uneccessary incident i have every witnessed/been a part of.

sh*t!! sorry to hear...also curious of what car that is.

seriously, bloody towbar tongue and ball should be a serious defect when not in use. if they coppers can defect rear towhook, then this one is much MUCH WORSE!
14-11-2009, 09:44 PM
Jibz

yeah thats true when you think about it. how can that shit even be legal?!
14-11-2009, 10:19 PM
KaZe86

twest - sorry to hear man that fkn sucks balls i cant believe he actually made up shit after that... i would so go to his house and smash him... ;)

Quote:

Originally Posted by Mugen_B16B

hahaha someone is tempted to the dark side :p

darkside is awesome... :thumbsup:
14-11-2009, 10:39 PM
TODA AU

Quote:

Originally Posted by Nepolian

You do know that I have based my statement on a EP3 flywheel and I still think that paying $500-600 to save 800-900 grams is still too much. Unless of course the car is regularly tracked to see the benefits. Having said that, I do know what you mean. Its just that in the real world most EP3 owners here would not reap those benefits as most of us are would be red light warriors at best.

I agree with Philip LEE, as he said.....

"I hate my light flywheel on my FL. Every change must be super quick or the revs will drop down too much. On a steep hill there is no chance not using the hand brake and needs to rev to like 3000 or it'll still roll backwards. Traffic jam is not fun!!

I tried my fd's pre FL and it's much better. Honestly I won't bother replacing the flywheel"

George, I do understand where you’re coming from,
But to be frank, I think your argument about the weight is flawed.
Rather than look at just the actual weight loss in the flywheel itself.
Look at the inertia of the thing & where it is in relation to the engine & wheels.

The inertia of the flywheel is something the engine must overcome before it does anything else.
Any reduction in flywheel inertia (weight) is multiplied through the gearbox. Hence the effect being greater in lower gears
Now speaking from experience, I can tell you that will notice the difference in an EP3.
Using one of our flywheels, the difference is a positive change in the character of the car without negative side effect.
What should also be mentioned is that on standard cars, flywheels like ours can’t cause situations such as described by Philip Lee.
Problems as described generally only arise when lightweight flywheels & other engine parts are combined with incorrectly set overrun fuel cut, TPS & poor tuning.
But then again, Mr Lee isn’t talking about an EP3 either, rather lightweight flywheels in general.

Anyway, before you all go off the deep end…
Please… Look at it realistically…
The EP3 is very similar to the DC5 & even the CL9 in the driver train.
Is the EP3 really so special that a flywheel & clutch that works like a charm in the DC5 & CL9, is just so mismatched to the EP3?
Bare in mind the benefit in the other cars is widely known & without drivability issues.
& just to question your manhood…
My wife drove a DC5 Type S for a number of years with a lightweight flywheel, in heavy traffic everyday without any of the issues described.
Weird huh…

Cheers

Adrian
15-11-2009, 12:27 AM
Twest

He was driving an older model Jeep Jerokee....Typical....He got annoyed cause i was slowing for the light, like any GOOD driver should....Trying to keep ep3's in the good books remember :)....Oh well... Shit happens.
15-11-2009, 09:00 AM
stoj19

Quote:

Originally Posted by jonske

got my O2 sensor installed today, worked fine (Denso #234-9004, about $170 AUD from ebay), no more crappy engine light :D

Personally I think that is a bad move. Honda's don't like non-genuine parts. I wouldn't be surprised if it came back.

wow and Twest that is rediculous. I still don't understand under any circumstance why he would reverse, what a lunatic. My heat goes out to the front of your EP3
15-11-2009, 09:44 AM
mtonep3

Damn twest that really sucks. Poor ep3!!
Seems the guy is a utter dumb shit to me!!
15-11-2009, 10:11 AM
Philip Lee

Adrian, I was talking my experience with my car which is a facelift EP3 with factory flywheel.

In performance terms I absoluetly agree with you. But as a daily car (I dun track unfortunately) it is more of a hassles. I think up to a stage it maybe too light for road use. It is always a compromise between comfort and performance.
15-11-2009, 10:15 AM
Philip Lee

Damn twest this absolutely suck.

I start to think it's about time to invest in a set of camera now.
15-11-2009, 06:50 PM
ep3_ctr

guys thinking of swapping out my mugen airbox for an aem one, any chance of it throwing a CEL and if so, what will happen?

Also, anyone interested in the mugen, pm me
15-11-2009, 10:06 PM
bigbaby0223

Just wondering...has everyone kept their original head unit when we bought the car?
15-11-2009, 10:10 PM
lil_foy

Quote:

Originally Posted by stoj19

Personally I think that is a bad move. Honda's don't like non-genuine parts. I wouldn't be surprised if it came back.

wow and Twest that is rediculous. I still don't understand under any circumstance why he would reverse, what a lunatic. My heat goes out to the front of your EP3

Denso is owned/owns sard.
Sard are a reputed brand.

I'd trust them fine.
15-11-2009, 10:30 PM
bigbaby0223

I have always thought that Sard makes their own injectors cuz for Evos, Tomei injectors (made by Denso) requires a specific wiring plug but Sard bolts staight on. I am not 100% sure though,
16-11-2009, 02:31 AM
Perry

Hey guys need help with wiper size again all I remembered passenger side is 380mm what is the driver side?
16-11-2009, 07:15 AM
Philip Lee

^ what did people end up getting for wipers? I need some soonish too. Cheers
16-11-2009, 09:32 AM
white_ep3_civic

Quote:

Originally Posted by Philip Lee

^ what did people end up getting for wipers? I need some soonish too. Cheers

I got a set a little while ago. I can't remember the brand but I did post it. I'll let u no the brand and size yen I get home
16-11-2009, 10:47 AM
Philip Lee

Quote:

Originally Posted by bigbaby0223

Just wondering...has everyone kept their original head unit when we bought the car?

yes i kept mine but replaced with an Alpine when it was broken.

Quote:

Originally Posted by white_ep3_civic

I got a set a little while ago. I can't remember the brand but I did post it. I'll let u no the brand and size yen I get home

thanks heaps.
16-11-2009, 11:08 AM
lil_foy

Quote:

Originally Posted by bigbaby0223

I have always thought that Sard makes their own injectors cuz for Evos, Tomei injectors (made by Denso) requires a specific wiring plug but Sard bolts staight on. I am not 100% sure though,

The sard 800's in the 180 are stamped denso.
16-11-2009, 11:12 AM
bigbaby0223

I would recommand Bosch wiper blades. Just go to any Supercheap Auto bring your wipers with you, they will have a ruler on the back of each Bosch wipers' packaging, or they also have the fitment charts in the shop.
16-11-2009, 11:22 AM
bigbaby0223

Quote:

Originally Posted by Philip Lee

yes i kept mine but replaced with an Alpine when it was broken.

thanks heaps.

Does the factory headunit play MP3 format CDs?
16-11-2009, 11:25 AM
Philip Lee

Quote:

Originally Posted by bigbaby0223

Does the factory headunit play MP3 format CDs?

EP3R (or any JDM Type Rs) never had standard factory headunit.

Sound systems are optional dealer fitted items so it depends on what the owner selected when he/she ordered the car.
16-11-2009, 11:27 AM
bigbaby0223

Quote:

Originally Posted by Philip Lee

EP3R (or any JDM Type Rs) never had standard factory headunit.

Sound systems are optional dealer fitted items so it depends on what the owner selected when he/she ordered the car.

Oh cool, thanks for that. I am just thinking about whether to get a new headunit as I am worried that a headunit from 2002 might not play MP3 format.:D
16-11-2009, 11:35 AM
Philip Lee

just put a burned cd in and see.
16-11-2009, 11:41 AM
bigbaby0223

Thanks for that. :thumbsup:

P.S. How much you rekon the original wheels worth?
16-11-2009, 11:56 AM
Philip Lee

Quote:

Originally Posted by bigbaby0223

P.S. How much you rekon the original wheels worth?

Unfortunately i have no idea.

this depends on many factors like condition, with/without tyres, what sort of tyres and trend left etc etc.
16-11-2009, 12:47 PM
Nepolian

Mine plays wma and mp3. Its a gathers brand that came with the car.
16-11-2009, 02:09 PM
white_ep3_civic

Quote:

Originally Posted by bigbaby0223

Thanks for that. :thumbsup:

P.S. How much you rekon the original wheels worth?

I saw a little while ago from shift or Jdm yard $1000 without tyres
16-11-2009, 02:11 PM
white_ep3_civic

Quote:

Originally Posted by bigbaby0223

I would recommand Bosch wiper blades. Just go to any Supercheap Auto bring your wipers with you, they will have a ruler on the back of each Bosch wipers' packaging, or they also have the fitment charts in the shop.

I tried Bosch 4 the whole new wiper arm but they didn't have the smaller size. But 4 just the replacement they r fine
16-11-2009, 02:14 PM
bigbaby0223

That's not cheap for factory wheels...
16-11-2009, 02:32 PM
Jibz

the wheels are Enkei
16-11-2009, 03:29 PM
Perry

Stock wheels are always over priced might as well use the money and get aftermarket ones.
16-11-2009, 03:46 PM
white_ep3_civic

The wiper blades. I can't remember the brand and it is not stamped on the arm wither. But they were from SUpercheap Auto and were around $40 each.
16-11-2009, 07:16 PM
Twest

Yea guys, absolutely gutted i am about my ep3....The thing thats killing me the most is the mugen lip has a small crack where it joins onto the original bumper...im fairly certain fibreglasser could patch it up though....hoping...

Next time you see any morons on the road, simply pull your ep3's over to the side and let them pass to avoid heartbreak...
17-11-2009, 10:00 AM
white_ep3_civic

The size of the wipers are. 15" 375mm
24" 600mm
17-11-2009, 10:17 AM
Mugen_B16B

guys cars up for sale, anyone from brisbane keen lemme no cheers
17-11-2009, 10:26 AM
Philip Lee

Quote:

Originally Posted by white_ep3_civic

The size of the wipers are. 15" 375mm
24" 600mm

thanks heaps.

Quote:

Originally Posted by Mugen_B16B

guys cars up for sale, anyone from brisbane keen lemme no cheers

any detail?
17-11-2009, 10:30 AM
white_ep3_civic

Quote:

Originally Posted by Mugen_B16B

guys cars up for sale, anyone from brisbane keen lemme no cheers

Yeh i seen that in the cars for sale section. Shame that you have to sell it.
17-11-2009, 10:38 AM
icecrm

Twest, at least you know who hit your car. I have no idea. I need a new front bar as well so maybe we can get a deal somewhere for 2
17-11-2009, 11:12 AM
Mugen_B16B

Quote:

Originally Posted by Philip Lee

thanks heaps.

any detail?

http://www.ozhonda.com/forum/showthread.php?t=123457
17-11-2009, 02:55 PM
Nepolian

Hey guys. I'm sure there's a plastic welder that can fix up ur bars. I mean, all panel beaters use them!
18-11-2009, 01:46 AM
Perry

Damn went to every single car shop in Mong Kok for the wipers no luck gerrrr.
18-11-2009, 04:01 PM
Philip Lee

hey u guys reckon a light tint FL tail lights look ok?

http://img.photobucket.com/albums/v4...C_0020aaaa.jpg
18-11-2009, 04:10 PM
burak213

Quote:

Originally Posted by Nepolian

Hey guys. I'm sure there's a plastic welder that can fix up ur bars. I mean, all panel beaters use them!

can't repair front bars since its plastic/fiberglass, has to be replaced
18-11-2009, 08:53 PM
ep3_ctr

Quote:

Originally Posted by burak213

can't repair front bars since its plastic/fiberglass, has to be replaced

fibreglass is easy to repair, plastic is harder but still very doable
18-11-2009, 09:20 PM
Nepolian

Quote:

Originally Posted by burak213

can't repair front bars since its plastic/fiberglass, has to be replaced

^^ You know because..............??

Anyway, give these guys a call......

http://www.plasticar.com.au/My_Homep...les/Page2.html

http://www.prestigeautosalon.com.au/quotation.asp

Also go and see some panel beaters who might know of a reputable plastic welders etc....

Obviously I do not know that state of your damages, Jimmy & co, but I have seen some pretty good repairs in the past :)

I'm just suggesting this as an alternative to getting one from Japan! Anyone considered a buddy club front bar??
19-11-2009, 06:39 AM
white_ep3_civic

Quote:

Originally Posted by Nepolian

^^ You know because..............??

Anyway, give these guys a call......

http://www.plasticar.com.au/My_Homep...les/Page2.html

http://www.prestigeautosalon.com.au/quotation.asp

Also go and see some panel beaters who might know of a reputable plastic welders etc....

Obviously I do not know that state of your damages, Jimmy & co, but I have seen some pretty good repairs in the past :)

I'm just suggesting this as an alternative to getting one from Japan! Anyone considered a buddy club front bar??

Yeh I really like the buddy club front but I don't I'll get 1 till I run out of things 2 do
19-11-2009, 12:00 PM
burak213

Quote:

Originally Posted by Nepolian

You know because..............??

I had someone smash my bumper, my mate (panel beater) said has to be replaced cause it was severely damaged ( hole in the front bar) and cannot be repaired
19-11-2009, 12:11 PM
p3p5y

Hey guys, shopping around for some tyres as mine are about gone (so long RE01R's :()

I've got the tyres on my stock rims atm (205/45/17) and I'm looking to replace them with RE001's.

Apparently the 205/45/17 size is more expensive than 215/45/17's which are more widely available. Are there any disadvantages to this in terms of performance or will it only affect the looks? I do like the look of the low profile on the RE01R's. I am only looking to replace the two front tyres. Is there going to be an issue if one if the front is 215/45/17 and the backs are 205/45/17?

The Bridgestone select stores around my local area (Fairfield/Liverpool) are quoting me $290 for 205/45/17 and $260 for 215/45/17. Anyone know if you can source RE001's for cheaper than this price?

Cheers.
19-11-2009, 01:09 PM
Nepolian

Quote:

Originally Posted by p3p5y

Hey guys, shopping around for some tyres as mine are about gone (so long RE01R's :()

I've got the tyres on my stock rims atm (205/45/17) and I'm looking to replace them with RE001's.

Apparently the 205/45/17 size is more expensive than 215/45/17's which are more widely available. Are there any disadvantages to this in terms of performance or will it only affect the looks? I do like the look of the low profile on the RE01R's. I am only looking to replace the two front tyres. Is there going to be an issue if one if the front is 215/45/17 and the backs are 205/45/17?

The Bridgestone select stores around my local area (Fairfield/Liverpool) are quoting me $290 for 205/45/17 and $260 for 215/45/17. Anyone know if you can source RE001's for cheaper than this price?

Cheers.

Maybe you should consider another brand.....

Dirrezza'a or KU36's

Pm/ask KOe1....he has just changed from RE001's to KU36's.

Theyre under 200 each if you shop around....
19-11-2009, 01:25 PM
icecrm

thanks george
20-11-2009, 03:25 AM
Perry

Quote:

Originally Posted by Philip Lee

hey u guys reckon a light tint FL tail lights look ok?

http://img.photobucket.com/albums/v4...C_0020aaaa.jpg

light tint will look ok do it Phil :thumbsup:
20-11-2009, 12:50 PM
Twest

Quote:

Originally Posted by icecrm

Twest, at least you know who hit your car. I have no idea. I need a new front bar as well so maybe we can get a deal somewhere for 2

ehh...I have come out better than you, barely...LOL.

Sourcing this front bar seems to be quite a task, the panel beater is look for one now...import looks like the only option. ]=
20-11-2009, 01:09 PM
Philip Lee

^ if u like the FL front bar, might take this opportunately to get one....
20-11-2009, 02:00 PM
Twest

Quote:

Originally Posted by Philip Lee

^ if u like the FL front bar, might take this opportunately to get one....

Roughly how long would it take to get the FL bar in?

I'm currently looking at the Buddyclub one, brand new its around $900 for the frontbar...I remember seeing someone on ozhonda selling the whole body kit for around $800 but i cant find the link, it was in the for sale section about 2-3 weeks ago...
20-11-2009, 05:45 PM
mtonep3

Does eu civic front bar fit ours???
20-11-2009, 06:11 PM
Nepolian

Quote:

Originally Posted by mtonep3

Does eu civic front bar fit ours???

I think Philip did mention that FL EP3 has a FL EU bar with lip......only a few pages back he did!
20-11-2009, 06:12 PM
Philip Lee

Quote:

Originally Posted by mtonep3

Does eu civic front bar fit ours???

my understanding is yes. Particularly FL which I think is just EU bar + spoiler. Not 100% sure tho.
21-11-2009, 10:33 AM
white_ep3_civic

Just bought a rear sway bar 4 my car and havin trouble takin it off. Just the 2 end bolts I can't seem 2 remove. There is a bolt but yen I try 2 loosen it th whole thing spins.
21-11-2009, 11:06 AM
Mugen_B16B

need a spanner and allen key
21-11-2009, 12:07 PM
white_ep3_civic

Quote:

Originally Posted by Mugen_B16B

need a spanner and allen key

Ah k does the Allen key go inside the thread?
21-11-2009, 01:45 PM
bigbaby0223

Hi guys, just got my EP3 2 days ago, now I am thinking about upgrading the exhaust as the stocky is very rusty. I have been looking into the Mugen, Fuji RM-01A and Fuji Legalis-R. Which one is the quietest? Please add your 2c, thanks!
21-11-2009, 07:25 PM
Mugen_B16B

Quote:

Originally Posted by white_ep3_civic

Ah k does the Allen key go inside the thread?

yep, allen key then spanner around and twist is diff directions, just make sure not to thread the allen key hole or ur fked lol
21-11-2009, 07:27 PM
Mugen_B16B

Quote:

Originally Posted by bigbaby0223

Hi guys, just got my EP3 2 days ago, now I am thinking about upgrading the exhaust as the stocky is very rusty. I have been looking into the Mugen, Fuji RM-01A and Fuji Legalis-R. Which one is the quietest? Please add your 2c, thanks!

theres the js racing 60rs in forsales area, cant go wrong with one at that price man
22-11-2009, 12:28 AM
white_ep3_civic

Quote:

Originally Posted by Mugen_B16B

yep, allen key then spanner around and twist is diff directions, just make sure not to thread the allen key hole or ur fked lol

Ah k cool thanks.
22-11-2009, 02:34 AM
bigbaby0223

Quote:

Originally Posted by Mugen_B16B

theres the js racing 60rs in forsales area, cant go wrong with one at that price man

I like J's Racing but the only problem is that I think they are all very loud.
22-11-2009, 08:17 AM
Twest

Quote:

Originally Posted by bigbaby0223

Hi guys, just got my EP3 2 days ago, now I am thinking about upgrading the exhaust as the stocky is very rusty. I have been looking into the Mugen, Fuji RM-01A and Fuji Legalis-R. Which one is the quietest? Please add your 2c, thanks!

I have the mugen Twinloop....It is Very expensive though I saw it for around $1800 from the uk before shipping.
22-11-2009, 09:11 AM
Perry

Sup guys, I'm back.
22-11-2009, 11:06 AM
SuperSteve

Quote:

Originally Posted by Perry

Sup guys, I'm back.

WB !

did u get me anything :D:D ?
22-11-2009, 11:32 AM
Philip Lee

Did u get any goodies Perry?
22-11-2009, 03:49 PM
KaZe86

J's racing is epic win! :thumbsup:

its not that loud i reckon its ok on normal driving and when you open vtec its way loud!! but each to their own! so yeah maybe do some research first but yeah i like the j's racing and also its cheap cheap!
22-11-2009, 09:24 PM
Mugen_B16B

i wouldnt say cheap but ur just a baller steven lol u got an sti now wat u still doin here:P hahahaha
22-11-2009, 10:21 PM
Perry

Quote:

Originally Posted by SuperSteve

WB !

did u get me anything :D:D ?

I got you a Tebby bear hehehe

Phil: Nah the only thing I bought was a broadway mirror there wasnt much to buy while I was over there, all EP3's in HK seems to all just disappeared .
23-11-2009, 04:11 PM
SuperSteve

hey guys. Just looking up options. Anyone know where i can buy tein coilovers from ?? Trying to get a idea how much a set of tein coilovers would go for
23-11-2009, 04:46 PM
Philip Lee

Which Tein? Super Street/Flex/Mono Flex/N1????? new/used??

you can try Fulcrum for some quotes. they are the Aust distributor.

do u have to have Tein? Buddyclub N+ is doing $1,699 atm @ 999.

Show 80 post(s) from this thread on one page

All times are GMT +10. The time now is 01:59 PM.

All logos and trademarks in this site are the property of their respective owner(s). The comments are the property of their posters.