EP3 Type R

[burak213]

Hey guys. I'm sure there's a plastic welder that can fix up ur bars. I mean, all panel beaters use them!

can't repair front bars since its plastic/fiberglass, has to be replaced

[ep3_ctr]

can't repair front bars since its plastic/fiberglass, has to be replaced

fibreglass is easy to repair, plastic is harder but still very doable

[Nepolian]

can't repair front bars since its plastic/fiberglass, has to be replaced

^^ You know because..............??

Anyway, give these guys a call......

http://www.plasticar.com.au/My_Homep...les/Page2.html

http://www.prestigeautosalon.com.au/quotation.asp

Also go and see some panel beaters who might know of a reputable plastic welders etc....

Obviously I do not know that state of your damages, Jimmy & co, but I have seen some pretty good repairs in the past

I'm just suggesting this as an alternative to getting one from Japan! Anyone considered a buddy club front bar??

[white_ep3_civic]

^^ You know because..............??

Anyway, give these guys a call......

http://www.plasticar.com.au/My_Homep...les/Page2.html

http://www.prestigeautosalon.com.au/quotation.asp

Also go and see some panel beaters who might know of a reputable plastic welders etc....

Obviously I do not know that state of your damages, Jimmy & co, but I have seen some pretty good repairs in the past

I'm just suggesting this as an alternative to getting one from Japan! Anyone considered a buddy club front bar??

Yeh I really like the buddy club front but I don't I'll get 1 till I run out of things 2 do

[burak213]

You know because..............??

I had someone smash my bumper, my mate (panel beater) said has to be replaced cause it was severely damaged ( hole in the front bar) and cannot be repaired

[p3p5y]

Hey guys, shopping around for some tyres as mine are about gone (so long RE01R's )

I've got the tyres on my stock rims atm (205/45/17) and I'm looking to replace them with RE001's.

Apparently the 205/45/17 size is more expensive than 215/45/17's which are more widely available. Are there any disadvantages to this in terms of performance or will it only affect the looks? I do like the look of the low profile on the RE01R's. I am only looking to replace the two front tyres. Is there going to be an issue if one if the front is 215/45/17 and the backs are 205/45/17?

The Bridgestone select stores around my local area (Fairfield/Liverpool) are quoting me $290 for 205/45/17 and $260 for 215/45/17. Anyone know if you can source RE001's for cheaper than this price?

Cheers.

[Nepolian]

Hey guys, shopping around for some tyres as mine are about gone (so long RE01R's )

I've got the tyres on my stock rims atm (205/45/17) and I'm looking to replace them with RE001's.

Apparently the 205/45/17 size is more expensive than 215/45/17's which are more widely available. Are there any disadvantages to this in terms of performance or will it only affect the looks? I do like the look of the low profile on the RE01R's. I am only looking to replace the two front tyres. Is there going to be an issue if one if the front is 215/45/17 and the backs are 205/45/17?

The Bridgestone select stores around my local area (Fairfield/Liverpool) are quoting me $290 for 205/45/17 and $260 for 215/45/17. Anyone know if you can source RE001's for cheaper than this price?

Cheers.

Maybe you should consider another brand.....

Dirrezza'a or KU36's

Pm/ask KOe1....he has just changed from RE001's to KU36's.

Theyre under 200 each if you shop around....

[icecrm]

thanks george

[Perry]

hey u guys reckon a light tint FL tail lights look ok?

light tint will look ok do it Phil

[Twest]

Twest, at least you know who hit your car. I have no idea. I need a new front bar as well so maybe we can get a deal somewhere for 2

ehh...I have come out better than you, barely...LOL.

Sourcing this front bar seems to be quite a task, the panel beater is look for one now...import looks like the only option. ]=

[Philip Lee]

^ if u like the FL front bar, might take this opportunately to get one....

[Twest]

^ if u like the FL front bar, might take this opportunately to get one....

Roughly how long would it take to get the FL bar in?

I'm currently looking at the Buddyclub one, brand new its around $900 for the frontbar...I remember seeing someone on ozhonda selling the whole body kit for around $800 but i cant find the link, it was in the for sale section about 2-3 weeks ago...