Four stud pattern on Type R?

Hey guys i ran into this dude that was selling his Teg, he claimed it was a type R though i didn't really believe it coz when i looked at the car it had a 4 stud pattern that any usual sports car should have.. though I have heard some rumors of some DC2R's which have a five stud pattern which are under '96 models.. is it true that only '96 models up have a five stud pattern and what are some signs that the car is a geniune Type R and not a fake..

cheers guys thanks for the help and sorry for the Noob questions lol

only some jdm had 4x114.3. If it was oz spec it was a fake

JDM 96 spec run 4x114.3

all other (JDM & AUDM) above 1998 (i think thats when the DC2r started running 5 stud) run 5x114.3

Should look under the bonnet and search for the VIN code.

It should look like this
http://www.carsales.com.au/used-cars/private/HONDA/INTEGRA/details.aspx?__sid=1178D5101BB1&Cr=0&__Ns=pCar_Yea rMade_Int32%7C0%7C%7CpCar_PrivateSpecialFlag_Int32 %7C1%7C%7CpCar_ImageCount_Int32%7C1&State=All%20St ates&distance=25&silo=1003&seot=0&__Nne=20&Model=I NTEGRA&R=5279022&__N=4294965322%200%204294965105%2 04294931709+834+285+257&trecs=32&Make=HONDA&state_ id=0&sort_type=6

JDM 96 spec, = 4lug.
JDM 98 spec/AUDM type-R (all 98+) = 5lug.

^that sounds correctus

have a search

im sure this has been covered many many many times

i been doing some research, not sure if im correct.. but here it goes...

JDM DC2R rear bumper has this beam going across it...
http://img299.imageshack.us/img299/6...uraintelo5.jpg
http://icbmotorsport.com/New/Rear_Fo...ar_Fogiiii.jpg

and this is a AUDM/USDM type R rear...
http://www.we-todd-did-racing.com/we...NDE%3D.jpg


i need some to confirm this... as i am not an expert on these models...


seems to me it is possibly a vti-r with front conversion, etc...
unless '96 spec was released with a diference rear bumper then '98 spec...

this is his rear bar...
http://liveimages.carsales.com.au/private/3203397.jpg

Quote:

---

Originally Posted by AsH_

i been doing some research, not sure if im correct.. but here it goes...

JDM DC2R rear bumper has this beam going across it...
http://img299.imageshack.us/img299/6...uraintelo5.jpg
http://icbmotorsport.com/New/Rear_Fo...ar_Fogiiii.jpg

and this is a AUDM/USDM type R rear...
http://www.we-todd-did-racing.com/we...NDE%3D.jpg


i need some to confirm this... as i am not an expert on these models...


seems to me it is possibly a vti-r with front conversion, etc...
unless '96 spec was released with a diference rear bumper then '98 spec...

this is his rear bar...
http://liveimages.carsales.com.au/private/3203397.jpg

---

SOUNDS ****N DODGY mate i wouldnt waste your time :) personal prefrence but its to much time to waste. sounds like a VTIR becouse my mate has one and thats the same back kit.

Quote:

---

Originally Posted by AsH_

i been doing some research, not sure if im correct.. but here it goes...

JDM DC2R rear bumper has this beam going across it...
http://img299.imageshack.us/img299/6...uraintelo5.jpg

and this is a AUDM/USDM type R rear...
http://www.we-todd-did-racing.com/we...NDE%3D.jpg

---

incorrect.

the first one is the 98+ integra rear bar (type r, gsi(98+), vtir(98+) all come with it)

the last one is the 94-97 integra rear bar (gsi, vtir)

jdm/usdm models are the same.. 98+ have the facelift rear bar, 94-97 have the prefacelift

also audm ones have a rear wiper blade, while jdm ones dont have em.

Quote:

---

Originally Posted by tRipitaka

incorrect.

the first one is the 98+ integra rear bar (type r, gsi(98+), vtir(98+) all come with it)

the last one is the 94-97 integra rear bar (gsi, vtir)

jdm/usdm models are the same.. 98+ have the facelift rear bar, 94-97 have the prefacelift

---

thanks for clearing that up.

Quote:

---

Originally Posted by AsH_

i been doing some research, not sure if im correct.. but here it goes...

JDM DC2R rear bumper has this beam going across it...
http://img299.imageshack.us/img299/6...uraintelo5.jpg

---

this is usdm as its an acura and left hand drive

Okay clearing things up.

JDM DC2-R (96 spec) FOUR LUGS, PRE-FACELIFT REAR BAR (NO EXTRA BEAM ACROSS THE BOTTOM)

JDM DC2-R (98 SPEC) & AUDM DC2-R (ALL TYPE-R IN AUSTRALIA IS 98+) HAS 5 LUGS and THE EXTRA BEAM ACROSS THE REAR BAR
updated front/rear bumper.

USDM TYPE-R (96 SPEC) Have pre-facelift (with lip) front/rear. (5lugs)
USDM: TYPE-R 96 SPEC just incase anyone is confused:
http://freebmw.net/safir/events/hpde...HRRI%20061.jpg

USDM TYPE-R (98 SPec) have facelift front & rear. no sidemoulds. (5lugs)

USDM 96 SPEC R (Pre-facelift with Lip)
http://www.2loww.com/Integra_94-01_O...Fiber_Hood.jpg

USDM/AUDM 98 SPEC R (Facelift, AUDM R comes with White Rims/Different design)
http://honda-type-r.com/photo/honda-integra-type-r.jpg

96 SPEC JDM R (Prefacelift rear Bar 4Lugs)
http://www.gtr-jdmspeedpower.com/images/dc2001.jpg


FACE LIFT REAR BAR: (98Spec)
http://images.motortrend.com/feature...ear_corner.jpg

PRE FACE LIFT REAR BAR: (96 Spec)
http://www.team-integra.net/images/B...k_together.jpg

Dude, 96 JDM Type R's come with PRE-FACELIFT rear bars. There are slight differences between the years. I say stuff looking for the visual differences and open up the engine bay, check out the VIN and import plate if its a personal import.

Quote:

---

Originally Posted by xntrik

Okay clearing things up.

JDM DC2-R (96 spec) FOUR LUGS, PRE-FACELIFT REAR BAR (NO EXTRA BEAM ACROSS THE BOTTOM)

JDM DC2-R (98 SPEC) & AUDM DC2-R (ALL TYPE-R IN AUSTRALIA IS 98+) HAS 5 LUGS and THE EXTRA BEAM ACROSS THE REAR BAR
updated front/rear bumper.

---

^^ absolutely correct... had a jdm 96 spec a while back while my cuz had a 98 spec jdm, so i saw the difference. the car you were looking at is a jdm 96 spec in melb... i've seen this car myself.

Quote:

---

Originally Posted by xntrik

USDM 96 SPEC R (Pre-facelift with Lip)USDM/AUDM 98 SPEC R (Facelift, AUDM R comes with White Rims/Different design)
http://honda-type-r.com/photo/honda-integra-type-r.jpg

---

The above USDM '98 used EK9 CTR wheels