Four stud pattern on Type R?

**HachiKilla** · 17-03-2008 02:09 PM

Hey guys i ran into this dude that was selling his Teg, he claimed it was a type R though i didn't really believe it coz when i looked at the car it had a 4 stud pattern that any usual sports car should have.. though I have heard some rumors of some DC2R's which have a five stud pattern which are under '96 models.. is it true that only '96 models up have a five stud pattern and what are some signs that the car is a geniune Type R and not a fake..

cheers guys thanks for the help and sorry for the Noob questions lol

**IZY-10** · 17-03-2008 02:12 PM

only some jdm had 4x114.3. If it was oz spec it was a fake

**45SET** · 17-03-2008 04:20 PM

JDM 96 spec run 4x114.3

all other (JDM & AUDM) above 1998 (i think thats when the DC2r started running 5 stud) run 5x114.3

**DC4Integra98** · 17-03-2008 04:48 PM

Should look under the bonnet and search for the VIN code.

**aznpsuazn** · 18-03-2008 01:32 AM

It should look like this
http://www.carsales.com.au/used-cars/private/HONDA/INTEGRA/details.aspx?__sid=1178D5101BB1&Cr=0&__Ns=pCar_Yea rMade_Int32%7C0%7C%7CpCar_PrivateSpecialFlag_Int32 %7C1%7C%7CpCar_ImageCount_Int32%7C1&State=All%20St ates&distance=25&silo=1003&seot=0&__Nne=20&Model=I NTEGRA&R=5279022&__N=4294965322%200%204294965105%2 04294931709+834+285+257&trecs=32&Make=HONDA&state_ id=0&sort_type=6

**xntrik** · 18-03-2008 02:07 AM

JDM 96 spec, = 4lug.
JDM 98 spec/AUDM type-R (all 98+) = 5lug.

**krogoth** · 18-03-2008 12:01 PM

^that sounds correctus

have a search

im sure this has been covered many many many times

**AsH_** · 18-03-2008 01:58 PM

i been doing some research, not sure if im correct.. but here it goes...

JDM DC2R rear bumper has this beam going across it...

and this is a AUDM/USDM type R rear...

i need some to confirm this... as i am not an expert on these models...

seems to me it is possibly a vti-r with front conversion, etc...
unless '96 spec was released with a diference rear bumper then '98 spec...

this is his rear bar...

**tectalk** · 18-03-2008 03:30 PM

Originally Posted by AsH_

i been doing some research, not sure if im correct.. but here it goes...

JDM DC2R rear bumper has this beam going across it...

and this is a AUDM/USDM type R rear...

i need some to confirm this... as i am not an expert on these models...

seems to me it is possibly a vti-r with front conversion, etc...
unless '96 spec was released with a diference rear bumper then '98 spec...

this is his rear bar...

SOUNDS ****N DODGY mate i wouldnt waste your time

personal prefrence but its to much time to waste. sounds like a VTIR becouse my mate has one and thats the same back kit.

**tRipitaka** · 18-03-2008 03:32 PM

Originally Posted by AsH_

i been doing some research, not sure if im correct.. but here it goes...

JDM DC2R rear bumper has this beam going across it...

and this is a AUDM/USDM type R rear...

incorrect.

the first one is the 98+ integra rear bar (type r, gsi(98+), vtir(98+) all come with it)

the last one is the 94-97 integra rear bar (gsi, vtir)

jdm/usdm models are the same.. 98+ have the facelift rear bar, 94-97 have the prefacelift

**jdm_kid** · 18-03-2008 03:37 PM

also audm ones have a rear wiper blade, while jdm ones dont have em.

**AsH_** · 18-03-2008 05:12 PM

Originally Posted by tRipitaka

incorrect.

the first one is the 98+ integra rear bar (type r, gsi(98+), vtir(98+) all come with it)

the last one is the 94-97 integra rear bar (gsi, vtir)

jdm/usdm models are the same.. 98+ have the facelift rear bar, 94-97 have the prefacelift

thanks for clearing that up.