Page 235 of 246 FirstFirst ... 135185225232233234235236237238245 ... LastLast
Results 2,809 to 2,820 of 2952

Thread: cu2 mods

  1. #2809
    Quote Originally Posted by Soulful View Post
    Just wondering

    what sort of offset should i order for the below wheels to fit on a stock CU2 Luxury ?

    http://www.ebay.com.au/itm/180916538...84.m1423.l2649

    http://www.ebay.com.au/itm/271006603...84.m1423.l2649

    which one looks better on a Volcano grey??
    Personally i think the second looks much better than the first one on a volcano grey vehicle, also the stock cu2 luxury rims have an +55 offset so you should be looking for something like around 35-45, also depending on your tyres also.

    Cheers

  2. #2810
    Quote Originally Posted by Ste View Post
    Anyone having 20L/100km in their euro? wondering if its normal for CU2
    i can still tolerate 15 but i think 20 is not how it supposed to be?
    any experienced euro can tell me?
    Hi
    I've put 4000kms on mine now and i get 9/100 highest around town and as little as 7.4/100 on the highway. 6sp manual

  3. #2811
    Silver rims matches really well with volcano grey, unless you are going JDM. Offset wise I think 35+ would be a safer offset for most and don't forget tyres profiles also plays a great role in achieving desired look.
    IN3RTIA

    ESPELIR Springs | 6000k MTEC | WORK GS1 | INJEN Cold Air Intake | Honda Access Kits | Fujitsubo Exhaust

  4. #2812
    Member Array
    Join Date
    Jan 2010
    Location
    Brisbane
    Car:
    CU2
    Quote Originally Posted by dangerfox View Post
    Hi
    I've put 4000kms on mine now and i get 9/100 highest around town and as little as 7.4/100 on the highway. 6sp manual
    When do u shift?
    what gets wet ...while its drying?

  5. #2813
    I don't rev the crap out of it much...
    Usually about 3-4k in 2nd maybe lower the rest.

  6. #2814
    Member Array
    Join Date
    Dec 2009
    Location
    Sydney
    Car:
    CU2, R33Gtst
    Quote Originally Posted by kelvinator124 View Post
    Personally i think the second looks much better than the first one on a volcano grey vehicle, also the stock cu2 luxury rims have an +55 offset so you should be looking for something like around 35-45, also depending on your tyres also.

    Cheers
    Quote Originally Posted by nxn75u View Post
    Silver rims matches really well with volcano grey, unless you are going JDM. Offset wise I think 35+ would be a safer offset for most and don't forget tyres profiles also plays a great role in achieving desired look.
    thanks guys for the info!

    I think i should go 19inch for extra $100 bucks!!

    http://www.ebay.com.au/itm/180916545...84.m1423.l2649

    so based on the info

    Front Wheel Size: 19-inches
    Front Wheel Width: 8.5-inches
    Rear Wheel Size: 19-inches
    Rear Wheel Size: 9.5-inches
    Stud Pattern: 5x120 PCD
    Front Wheel Offset / ET: 35
    Rear Wheel Offset / ET: 35
    Center Bore: 72.6

    this will fit my car with easy??

  7. #2815
    Quote Originally Posted by Soulful View Post
    thanks guys for the info!

    I think i should go 19inch for extra $100 bucks!!

    http://www.ebay.com.au/itm/180916545...84.m1423.l2649

    so based on the info

    Front Wheel Size: 19-inches
    Front Wheel Width: 8.5-inches
    Rear Wheel Size: 19-inches
    Rear Wheel Size: 9.5-inches
    Stud Pattern: 5x120 PCD
    Front Wheel Offset / ET: 35
    Rear Wheel Offset / ET: 35
    Center Bore: 72.6

    this will fit my car with easy??
    One question also isnt the euro cu2 have a pcd pattern of 5 x 114.3 not 120? other than that it will fit easily with the right tyres

    cheers

  8. #2816
    Member Array
    Join Date
    Jan 2010
    Location
    Brisbane
    Car:
    CU2
    Quote Originally Posted by dangerfox View Post
    I don't rev the crap out of it much...
    Usually about 3-4k in 2nd maybe lower the rest.
    I change at 2 or 7.2 nothing in between























    Natsrs
    what gets wet ...while its drying?

  9. #2817
    Any side shoots?

    Looks good

    Quote Originally Posted by Vaku View Post
    roof spoiler installed, looks alright!




    EZ Lip


  10. #2818
    Quote Originally Posted by Soulful View Post
    thanks guys for the info!

    I think i should go 19inch for extra $100 bucks!!

    http://www.ebay.com.au/itm/180916545...84.m1423.l2649

    so based on the info

    Front Wheel Size: 19-inches
    Front Wheel Width: 8.5-inches
    Rear Wheel Size: 19-inches
    Rear Wheel Size: 9.5-inches
    Stud Pattern: 5x120 PCD
    Front Wheel Offset / ET: 35
    Rear Wheel Offset / ET: 35
    Center Bore: 72.6

    this will fit my car with easy??
    Are you lowered?

    And the Euro's stud pattern is 5x114.3 not 5x120

  11. #2819
    Member Array
    Join Date
    Dec 2009
    Location
    Sydney
    Car:
    CU2, R33Gtst

    Thumbs down

    Quote Originally Posted by euRo_noob View Post
    Are you lowered?

    And the Euro's stud pattern is 5x114.3 not 5x120
    Nah complete stock car, so I guess the wheels stud pattern is the main problem assuming they won't be able to customise

  12. #2820
    The EZ lip actually looks great!
    IN3RTIA

    ESPELIR Springs | 6000k MTEC | WORK GS1 | INJEN Cold Air Intake | Honda Access Kits | Fujitsubo Exhaust

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.