RB1-ODC **Stance Build Thread**

[Rage King]

^^ thanks for the clarificaiton..

with regards to drop in K&N filter ..is this the correct part number for it? K&N 33-2072 or is this a part number that is compatible to our ODC?

i need the fog/driving lights as i do alot of distance driving int he night

[evolution]

I beleive it is a compatible part #

Do the foggies help? They do bugger all difference for me. The HID conversion helped a lot more

[Rage King]

I beleive it is a compatible part #

Do the foggies help? They do bugger all difference for me. The HID conversion helped a lot more

yes it does help for me - especially in the dark woods/forest drive through. LOL.

might change the bulb to a HID kit too for the foggies.

[Rage King]

anyone know what these 17in wheels came from?

wheel ET specs?



according to the web they are euro R wheels?

[AusAccord]

looks like Euro R. not sure ET, may be +55 or even +60 if really from JDM

[Rage King]

looks like Euro R. not sure ET, may be +55 or even +60 if really from JDM

do they have these wheels locally in the AUDM Euro's? (NON -R)

got a set of these puppies lastnight and gunna wack them on the ODC for now until funds become available for 18x9 staggered sets

came with 225/45/17 tyres.

[AusAccord]

believe AUDM CL9 comes with this style not sure same spec.
rolling diameter with 225/45/17 is way off by 4.714% to oem 215/60/16, not recommend mate!!

[Rage King]

believe AUDM CL9 comes with this style not sure same spec.
rolling diameter with 225/45/17 is way off by 4.714% to oem 215/60/16, not recommend mate!!

to make this worthy - must be 40 series right?

otherwise whats the worse case scenario? speedo will be off?

EDIT: 50 series ...thanks

[evolution]

The wheels are OEM Honda made by Enkei, 17x7 +55

I beleieve, this design comes standard on the JDM CL7 Euro R in gunmetal

AUDM Accord Euro 05 CL9 Lux, 06 CL9 Sport and 07 Limited Edition came with these as well, but in Silver.

They aren't that 'special', but they look nice

As for the tires, they are too small, you will need to change to a 50 profile tire to fit on the Odyssey to get the proper speedo reading

[2k1cvc]

Wish/WTB Parts
- Modulo/Absolute roof spoiler
- Modulo/Absolute side skirts
- Mugen Grill
- 18inch Wheels (pref staggered config)
- Rear adjustable camber kit
- Rear sway bar kit (must be thicker than OEM is 12-14mm)


So i guess ill be doing this nice and slow as parts are hard to come by and i will update with pics, progress of my build.

any inputs or suggestions is appreciated

Hi Rage King

Welcome to the ODC family

18's arent going to give you "stance" your going to need some 20's and what do you know i have some mint AME's FS below are some images so give me a shout

[F] 20x8.5 +40
[R] 20x9.0 +38

Also, again relating to "stance" imo the TEIN's arent going to give you that ride height you need to achieve "stance" It's lowest setting will be too high (but thats just me bcos i love super low) i'd suggest some RSR's or bag it

[Rage King]

wow 2k1cvc - that is some nice ODC u got ... 20's is abit too big for me, as the bangabus is always fully loaded, hence why 18's or 19's worse case is what im looking for.

also i dont want too much issues with rubbing/rolling etc. but yes i know what you mean by stance.

RSR's? - how much are they? similar to Teins super flex wagon?

EDIT: your front bar - did that come with the oem foggies already? or did you have them cut in and installed?

[2k1cvc]

wow 2k1cvc - that is some nice ODC u got ... 20's is abit too big for me, as the bangabus is always fully loaded, hence why 18's or 19's worse case is what im looking for.

also i dont want too much issues with rubbing/rolling etc. but yes i know what you mean by stance.

RSR's? - how much are they? similar to Teins super flex wagon?

EDIT: your front bar - did that come with the oem foggies already? or did you have them cut in and installed?

20 is never to big 20’s are the new 18’s…. Trust me , if you bought 18’s, you will wish you bought 20 This was my daily only until recently, I have no issues with scrubbing however I did roll the rear wheels arch lips a little just in-case as I’m running a -1 camber. It is the size & width (before anything more aggressive) with no issues what so ever. Are you in Sydney? You must see to understand J

With that said perhaps a Odyssey meet In Sydney guys?

RSR’s I bought 2nd from a guy in this forum, he they go much lower than the TEIN’s so with 20’s you won’t have a issue.

Got the foggies installed from Honda Dealer a week after buying the car, they stuffed up something in our papers so gave us free foggies. They cut and installed J

A few guys here are on 20’s…. There is 3 RB1’s that I know of and 2 RB3’s and we all dads with fams J