RB1-ODC **Stance Build Thread**

[evolution]

I beleive it is a compatible part #

Do the foggies help? They do bugger all difference for me. The HID conversion helped a lot more

[Rage King]

I beleive it is a compatible part #

Do the foggies help? They do bugger all difference for me. The HID conversion helped a lot more

yes it does help for me - especially in the dark woods/forest drive through. LOL.

might change the bulb to a HID kit too for the foggies.

[Rage King]

anyone know what these 17in wheels came from?

wheel ET specs?



according to the web they are euro R wheels?

[AusAccord]

looks like Euro R. not sure ET, may be +55 or even +60 if really from JDM

[Rage King]

looks like Euro R. not sure ET, may be +55 or even +60 if really from JDM

do they have these wheels locally in the AUDM Euro's? (NON -R)

got a set of these puppies lastnight and gunna wack them on the ODC for now until funds become available for 18x9 staggered sets

came with 225/45/17 tyres.

[AusAccord]

believe AUDM CL9 comes with this style not sure same spec.
rolling diameter with 225/45/17 is way off by 4.714% to oem 215/60/16, not recommend mate!!

[evolution]

The wheels are OEM Honda made by Enkei, 17x7 +55

I beleieve, this design comes standard on the JDM CL7 Euro R in gunmetal

AUDM Accord Euro 05 CL9 Lux, 06 CL9 Sport and 07 Limited Edition came with these as well, but in Silver.

They aren't that 'special', but they look nice

As for the tires, they are too small, you will need to change to a 50 profile tire to fit on the Odyssey to get the proper speedo reading

[Rage King]

believe AUDM CL9 comes with this style not sure same spec.
rolling diameter with 225/45/17 is way off by 4.714% to oem 215/60/16, not recommend mate!!

to make this worthy - must be 40 series right?

otherwise whats the worse case scenario? speedo will be off?

EDIT: 50 series ...thanks

[2k1cvc]

Wish/WTB Parts
- Modulo/Absolute roof spoiler
- Modulo/Absolute side skirts
- Mugen Grill
- 18inch Wheels (pref staggered config)
- Rear adjustable camber kit
- Rear sway bar kit (must be thicker than OEM is 12-14mm)


So i guess ill be doing this nice and slow as parts are hard to come by and i will update with pics, progress of my build.

any inputs or suggestions is appreciated

Hi Rage King

Welcome to the ODC family

18's arent going to give you "stance" your going to need some 20's and what do you know i have some mint AME's FS below are some images so give me a shout

[F] 20x8.5 +40
[R] 20x9.0 +38

Also, again relating to "stance" imo the TEIN's arent going to give you that ride height you need to achieve "stance" It's lowest setting will be too high (but thats just me bcos i love super low) i'd suggest some RSR's or bag it

[2k1cvc]

Key doesn't need to be inserted to operate the auto 3rd row, but I think the car must be on ground (ie not jacked up). I had the car up on the hoist once and tried to operate the third row and it wouldn't move.

car also needs to be in [P] "park" for it to operate

[Rage King]

wow 2k1cvc - that is some nice ODC u got ... 20's is abit too big for me, as the bangabus is always fully loaded, hence why 18's or 19's worse case is what im looking for.

also i dont want too much issues with rubbing/rolling etc. but yes i know what you mean by stance.

RSR's? - how much are they? similar to Teins super flex wagon?

EDIT: your front bar - did that come with the oem foggies already? or did you have them cut in and installed?

[markismaximus]

Build thread and not 1 pic of the car... come on