FN2 modification

[dmx]

would 20" be too large for FN2 ?..Coz the car is already a heavy one

come on guys, the trend is 20" now.don't be regret later (like me

[Malenic1981]

CPL made some good gains, that's around 20HP@wheels over stock one, not bad at all

[GupZ]

come on guys, the trend is 20" now.don't be regret later (like me

Wot ve happened to u dude

[GupZ]

there's development of the carbon fiber intake from GruppeM for the FN2

Where do you get this info from ?

Just have had a look at the GruppeM web site, no air intake for FN2

[Wazza]

Rumour has it that James from Hondata/Hondatech has just purchased a Civic Type R and is using it as a test car to develop a header, exhaust, intake, ECU combination for the FN2. Waiting in anticipation.....

[Chris_typer]

Rumour has it that James from Hondata/Hondatech has just purchased a Civic Type R and is using it as a test car to develop a header, exhaust, intake, ECU combination for the FN2. Waiting in anticipation.....

That sounds awesome...only thing is the new ECU that hondata has released disables the stock honda immobiliser and for some, well for me that is my actual insurance company won't insure me unless the immobiliser is enabled..hopefully James can actually rectify this through his testing.

[lukits01]

Rumour has it that James from Hondata/Hondatech has just purchased a Civic Type R and is using it as a test car to develop a header, exhaust, intake, ECU combination for the FN2. Waiting in anticipation.....

http://www.hondatech.com.au/forum/showthread.php?t=1504

[Chris_typer]

http://www.hondatech.com.au/forum/showthread.php?t=1504

This looks insane...probably encourage anyone wanting to do mod's to there new FN2 to wait for hondatech to complete this project first.

[Wazza]

That sounds awesome...only thing is the new ECU that hondata has released disables the stock honda immobiliser and for some, well for me that is my actual insurance company won't insure me unless the immobiliser is enabled..hopefully James can actually rectify this through his testing.

The Aus Spec Hondata ECU will allow for the factory immobilser to still function...

[GupZ]

The Aus Spec Hondata ECU will allow for the factory immobilser to still function...

so do you know where could buy one of these ECU?

[Wazza]

The Hondata ECU is only in the inital stages of development, at a guess I would say you need to wait at least six months until they are released.

[Chris_typer]

so do you know where could buy one of these ECU?

Yes well I actually posted in the Hondata forum and apparently the guy actually design the ECU and other mod's has about 4 stores in NSW's alone which sells his parts...so I suppose when it gets closer to release date, I will be asking where abouts we can purchase the mods.