FN2 modification

[GupZ]

Hi everyone.

Is there any after market parts for the New CTR FN2?

Such as Cat back and things like that:

[stephen8512]

im thinkin at this stage....no

[Malenic1981]

Try checking some europian and UK sites, they are most likely to start with mods

Check these

http://www.banzai-tuning.de/
Hondata is the way
http://www.cplracing.co.uk/news.php

[Tofu]

there's development of the carbon fiber intake from GruppeM for the FN2

[GupZ]

Try checking some europian and UK sites, they are most likely to start with mods

Check these

http://www.banzai-tuning.de/
Hondata is the way
http://www.cplracing.co.uk/news.php

For this web site, http://www.banzai-tuning.de/

I found a set of coilcovers for the FN2, however, can't understand the languages in the web site, how can you guys normall order parts from em?

Many thx

[EG5]

leave it for another few months , some aftermarket catback , header etc will come out soon

[lukits01]

CPL have a reflash thats supposedly making 173wHp
its on their website
they have a prototype header+exhaust but wont be releasing just yet

and theres a AEM short ram intake for sale in the UK

I will be testing if previous K20 Flywheel and LSD will fit in the FN2, at this stage, there's no reason to say that they wont.

EP3 front camber bolts will fit FN2 but have not confirmed if they are 14mm or 16mm bolts

Front and Rear Brake Pads are the same as EP3 and therefore same as S2000 as well as AUSDM DC5R (TBC) not sure about the discs, pretty sure the front is same as AUSDM DC5R at 300mm

oh as for wheels
most agressive offset you can get safely is
8J +48
or
7.5J +43
Diameter up to 20" has been ok

[[RSX 03]]

leave it for another few months , some aftermarket catback , header etc will come out soon

JDM or UK parts?

[GupZ]

CPL have a reflash thats supposedly making 173wHp
its on their website
they have a prototype header+exhaust but wont be releasing just yet

and theres a AEM short ram intake for sale in the UK

I will be testing if previous K20 Flywheel and LSD will fit in the FN2, at this stage, there's no reason to say that they wont.

EP3 front camber bolts will fit FN2 but have not confirmed if they are 14mm or 16mm bolts

Front and Rear Brake Pads are the same as EP3 and therefore same as S2000 as well as AUSDM DC5R (TBC) not sure about the discs, pretty sure the front is same as AUSDM DC5R at 300mm

oh as for wheels
most agressive offset you can get safely is
8J +48
or
7.5J +43
Diameter up to 20" has been ok

would 20" be too large for FN2 ?..Coz the car is already a heavy one

[lukits01]

would 20" be too large for FN2 ?..Coz the car is already a heavy one

doesn't stop people from doing it ahhaha
theres a few in the UK forums wearing 20"
no doubt they look nice as they fill the guards

[GupZ]

doesn't stop people from doing it ahhaha
theres a few in the UK forums wearing 20"
no doubt they look nice as they fill the guards

I would probably keep it on 18".

[lukits01]

I would probably keep it on 18".

Same here, but I have 17s for race rubber in the near future
and seeing that the brakes are same as AUSDM DC5R you could probably fit 16" if you really wanted to