Modifying my Stock ECU P28 to not look for VTS-VTEC Spool Solenoid??

[Lukezen27]

Hey Guys

Anyone know any easy ways to Modifying my P28 not to look for the 21 VTS - VTEC Spool Solenoid ?

Now the e-manage blue has taken over the VTEC cross over point the stock ECU is still looking for the VTEC Spool Solenoid..

ECU-MAN can do it no problems but he's not in Sydney and my project car is also my work car and I can't be without it for any period of time..

Both my brothers are AV PB makes and I work for an AV company so soldering will never be a problem if needed.. lol

Thanks Guys

Luke

[ProECU]

needs to be disabled in the code. Do you have access to burning eproms?

[Lukezen27]

needs to be disabled in the code. Do you have access to burning eproms?

Hey ProECU

My ECU's not chipped so having access to ROM burner won't help?

[ProECU]

doesnt the emanage have a feedback output wire for VTS back to the ecu?

Just connect D6 to A4

[Lukezen27]

doesnt the emanage have a feedback output wire for VTS back to the ecu?

You would think so wouldn't you but I don't think so and I'm using the very costly plug & play harness

Would just bypassing the e-manage and connecting VTS wire affect the e-managements ability to control the VTEC?

I've not opened my stock ECU but the back has
37820-P28-Q00
776-300226

[Lukezen27]

doesnt the emanage have a feedback output wire for VTS back to the ecu?

Just connect D6 to A4

Thanks bro

Any chance you can tell me how to find D6 to A4?

In pic forum would be awesome

[ProECU]

do a search on the net for a pic. I dont keep pics coz its second nature to me.

[Lukezen27]

do a search on the net for a pic. I dont keep pics coz its second nature to me.

Dose the odb1 B16A have the same as my D16Y1 pin setup?
ie
http://b16a2.kicks-ass.net/diy/pgmfi...FI-pins1-2.jpg

Found this
http://www.superhonda.com/forum/f55/...inouts-217405/

D6-VTM VTEC pressure switch Light Blue (Purple on the e-manage), to A4-VTS VTEC solenoid GRN/YEL, (Blue on the e-manage)

Are you should connecting them will work?

[ProECU]

D6-VTM VTEC pressure switch Light Blue, n/a to A4-VTS VTEC solenoid GRN/YEL, n/a

Are you should connecting them will work?

Correct.

[Lukezen27]

Correct.

Cool

I'll go and give it a shot...

I do it on the ECU side or the wiring loom side?

Thanks

Luke

[ProECU]

jump the emanage vtec signal and connect to ecu side of VTP

[Lukezen27]

jump the emanage vtec signal and connect to ecu side of VTP

NICE!!

The error codes gone

Now I'm off for a test drive to check if VTEC's working

Then I'll solder em in

PS my ECU has all the wrong colours lol