1994 vtir not kicking over

[MEN15S]

OK

I have replaced Coil and have Spark Now
I replaced Spark Plugs
Checked Leads and double check the go to correct place
I have Fuel I can smell it out the exhaust pipe,
I have Timming Belt Still Checked that as well
I reset the ECU

Its not starting Can anyone think of anything else to do please help.

Im running out of ideas.

Anyway to get s Engine Check code to see the problem ?

what else could it be ahhhhhhhhhhhh

OK this is what happen

The car started to Misfire then Died
Checked for Sparks Didnt get anything
Replaced the Coil

Now we have sparks but not starting ahhhhhhhh soo annoying

[her0]

after all that, you might of flooded the engine with fuel? is that even possible? thats why it might now start now.

just food for thought.

[ECU-MAN]

is the rotor button turning when you crank the engine ??

are there any codes in the ECU

[MEN15S]

Rotor is spinning,

How do i get codes from ECU ?

[EGJOE]

I know this might sound a bit backyard....
If you have a mate that has b series that is running try swaping suspect parts eg. like whole dizzy. If it starts something in dizzy and start swaping dizzy internals to narrow it down.
Check your alarm as well if you have one sometimes they have multiple stage imobilisers.

Cheers
EGJOE

[kerim]

ey man, try the main relay if you haven't done so already,

http://www.ozhonda.com/forum/showthread.php?t=31796

[MEN15S]

sounds like there isnt any compression ??

is that normal ?

[hisoka]

did you try push starting it , ? eg joe got pretty good idea there.

[VTec1987]

U fixed the spark problem but you probably messed up the leads


http://images.google.com.au/imgres?i...%3Den%26sa%3DN

[MEN15S]

spark plugs are fine... still not starting

[ECU-MAN]

do you get a strong spark, is a waek pissy spark ??

could still be the ICM