Quote Originally Posted by Stephen_AUS View Post
WOW this has started to turn into a big rant. Idk what more answers you need, as I have sent you heaps of PM's through ClubITR about this.

About the header, you can use the JDM EP3 4-2 header you have now, you will require a EP3/Aftermarket Sway as I have said a dozen of times. Besides that, it will bolt straight on with no hassles. If you want you can get a cat welded in and if its still too loud put a muffler on it (will change the tone, but normal when changing things). In the end ... if you still complaining about loud ... dont get a 70RR. Settle with the 60RS and find youself a Toda Header. Similar tones, but not as epic as 70RR.

This is your call, I am only suggesting ...
How can you call this a rant when you yourself had SIMILAR dramas, questions and thread about the same exhaust
I'm just making sure i make the right decision BEFORE i buy it not after then ask questions! i knew my header would fit all you have to do is look at the exhaust, the sway bar can wait as my car won't fall apart without it! I'm planning on welding a cat on any decat system i put on my street car not that it will quieten it down, maybe change the tone a tad.