Page 1 of 10 1234 ... LastLast
Results 1 to 12 of 114

Thread: Camber Kits

  1. #1

    Camber Kits

    Hey guys just need sum info about rear camber kits for my euro ,
    Anyone got any suggestions on were to get them from and what brand they have used and how much.

    I need one asap due to my car been so low that i have to change and rotate my tyres around every month,
    My cars been lowered 7 inches at the back so dont no how much negative camber there is so alot
    How much can each diffrent camber kits be adjusted by
    Last edited by TEMPTN; 11-01-2007 at 01:34 PM.

  2. #2
    Ozhonda Subscriber Array
    Join Date
    May 2004
    Car:
    RX450h / RB3
    i'm using Vision one on my Odyssey its very good, it looks and made exactly like the OEM one except this one you can adjust it, and to buy just ask JDM Concept @ the trader section

  3. #3

  4. #4
    Has anyone used k mac kits b4?

  5. #5
    Ozhonda Subscriber Array
    Join Date
    May 2004
    Car:
    RX450h / RB3
    why Kmac get japanese brand one

  6. #6
    well can anyone tell me what good brands and were to purchase them from. and how hard is the fitting, im in syd

  7. #7
    Quote Originally Posted by aka_NSX View Post
    why Kmac get japanese brand one

    i dont no any jap brands and kmac can fit im to lazy to look around for people to fit unless u wanna fit it for me

  8. #8
    Ozhonda Subscriber Array
    Join Date
    May 2004
    Car:
    RX450h / RB3
    Quote Originally Posted by TEMPTN View Post
    i dont no any jap brands and kmac can fit im to lazy to look around for people to fit unless u wanna fit it for me
    i told u to contact JDM concept @ trader section then if u need to get them installed just take it to TOP ONE 95998965 @ Arncliffe simple

    and if u r too lazy to look around why u bother to post on this froum and ask ppl opinion

  9. #9
    lowered 7" at the back??? is that even possible?

    picture please :P

  10. #10
    damn my LCA doesn't even have 7 inches clearance as stock. lol

  11. #11
    Quote Originally Posted by aka_NSX View Post
    i told u to contact JDM concept @ trader section then if u need to get them installed just take it to TOP ONE 95998965 @ Arncliffe simple

    and if u r too lazy to look around why u bother to post on this froum and ask ppl opinion
    im asking so peple what they suggest so the one 1 that sound the most effective and efficient i will go and purchase
    look around as in going to places etc u gets?

  12. #12
    Member Array
    Join Date
    Jul 2004
    Location
    I come from the land down under
    Car:
    What happend to my Honda
    Stuff the camber kit, looks nice when the wheels are bent...
    you can afford replacing wheels every month Mr Donald Trumph

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.