Results 1 to 8 of 8
  1. #1
    Member Array
    Join Date
    May 2005
    Location
    Villawoood
    Car:
    n/a

    Gear shifting problem with ITR box

    I have got this annoying problem with my gearbox, whenever I do a fast shift from second to third at high rpm (7500+), I can’t always engage it properly, it doesn’t crunch or anything but it just gets stuck in the middle and I can’t push it up to third. It used to happen like once every 10 races, but it gets more frequent now like more than half of the time I can’t shift 2-3 properly. All the other gears are perfectly fine. Any suggestions? Btw the box is a stock ITR box with ES bushings.

  2. #2
    Account Disabled Array
    Join Date
    Sep 2004
    Location
    Sydney
    Car:
    CT9A
    Quote Originally Posted by xtercii View Post
    I have got this annoying problem with my gearbox, whenever I do a fast shift from second to third at high rpm (7500+), I can’t always engage it properly, it doesn’t crunch or anything but it just gets stuck in the middle and I can’t push it up to third. It used to happen like once every 10 races, but it gets more frequent now like more than half of the time I can’t shift 2-3 properly. All the other gears are perfectly fine. Any suggestions? Btw the box is a stock ITR box with ES bushings.

    change the gearbox fluid. Might be low oil or old oil.

  3. #3
    Ninja turtle Array
    Join Date
    May 2004
    Location
    Sydney
    Car:
    Chloe
    Change the transmission fluid first. Also check that your clutch fluid level is sufficient. If it still has difficulty going in, then your 3rd gear synchro might be worn.
    --------------------------------------
    Stocky CL9 - 1:17.2

  4. #4
    Member Array
    Join Date
    Jul 2006
    Location
    Sydney
    Car:
    EK4
    This sounds like it may be a syncrho problem.

  5. #5
    Member Array
    Join Date
    May 2005
    Location
    Villawoood
    Car:
    n/a
    synchro is an obvious possibility everyone would say, but gearbox feels really good, not notchy at all in any gear and even when it's cold it's still very smooth and no crunch for reverse at all. Many experienced ppl who's driven it said the box feels fine.

    btw new clutch and GB oil were replaced 7500km ago...but might look into that as well.

  6. #6
    Ninja turtle Array
    Join Date
    May 2004
    Location
    Sydney
    Car:
    Chloe
    Quote Originally Posted by xtercii View Post
    synchro is an obvious possibility everyone would say, but gearbox feels really good, not notchy at all in any gear and even when it's cold it's still very smooth and no crunch for reverse at all. Many experienced ppl who's driven it said the box feels fine.

    btw new clutch and GB oil were replaced 7500km ago...but might look into that as well.
    If GB fluid was changed 7500km, it should be ok, but check your clutch fluid level. Sometimes a very minor leak can bring the level to just below minimum (and it should be at the maximum level anyway)
    --------------------------------------
    Stocky CL9 - 1:17.2

  7. #7
    Array
    Join Date
    Aug 2003
    Location
    Unit 5/15 Sefton Rd, Thor
    Car:
    08 Red CU2 Euro
    What gear oil? You'll get that exact problem if the oil used is too thick...
    EG: API GL5, that'll do it.
    Gear oil should be GL4
    Last edited by TODA AU; 19-02-2007 at 07:27 AM.
    TODA Performance Australia Pty Ltd
    TODA Racing - FIGHTEX - MFactory - HALTECH - EXEDY
    Race engines, Dyno tuning, Licenced workshop, Parts.
    P:0401869524 email: toda@todaracing.com.au

  8. #8
    Member Array
    Join Date
    Feb 2007
    Location
    melb
    Car:
    SHIT BOX
    castrol syntrix should fix that...

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.