Mugen Airbox

[Chris_F]

yea it's not a very large filter... the surface area would probably only be a bit more than stock.

interestingly, the same sized filter is used for a number of other applications that would require more air than the k24.

[aaronng]

yea it's not a very large filter... the surface area would probably only be a bit more than stock.

interestingly, the same sized filter is used for a number of other applications that would require more air than the k24.

For what other cars does GruppeM use this filter for?

[TypeG]

The Gruppe M rules for looks and compromise
The Mugen kit is too close to ice box setup but hey if you got the cash more power to ya

but Mugen do have the CF look =)

[TypeG]

i dun think the size of the filter will affect much since the pipe size is the same

[Chris_F]

For what other cars does GruppeM use this filter for?

DC5, EK9, DC2, Audi TT, e36 M3 etc. etc.

http://www.gruppem.co.jp/en/product/index.html

As far as I can tell the same filter is being used - I think there's only one part number for the filter but I haven't been bothered checking to verify that 100% - one things certain it's not a cl7 specific filter

EDIT: I just double thecked the part number and it is the same filter. R34 GTR uses the same as well.

[sodaz]

but Mugen do have the CF look =)

The gruppe M has a CF heatshield too.

The Mugen kit comes with more stuff than the Gruppe M kit from what i've seen. The Gruppe M kit is an SRI with a heatshield whereas the Mugen comes with the top and bottom lid, intake horn and an air scoop.

[TypeG]

The gruppe M has a CF heatshield too.

The Mugen kit comes with more stuff than the Gruppe M kit from what i've seen. The Gruppe M kit is an SRI with a heatshield whereas the Mugen comes with the top and bottom lid, intake horn and an air scoop.

nah i mean mugen do have the look as well =)

[E-Gene]

So anyone here's dynoed their Euro with the Mugen Airbox before?

[TypeG]

So anyone here's dynoed their Euro with the Mugen Airbox before?

u will have to do it yrself with my airbox =)

[E-Gene]

u will have to do it yrself with my airbox =)

I'll be having it dynoed in a few weeks actually. Will post up the results once I've got them.

Anyone with Injen or Comptech intakes dyno figures so we can compare?

[aaronng]

I'll be having it dynoed in a few weeks actually. Will post up the results once I've got them.

Anyone with Injen or Comptech intakes dyno figures so we can compare?

I have my DIY intake dyno. But it wasn't done on a dyno dynamics.

[TypeG]

i got it
with my.....yr exhuast and injec too