Results 1 to 12 of 136

Hybrid View

  1. #1
    Ninja turtle Array
    Join Date
    May 2004
    Location
    Sydney
    Car:
    Chloe
    Quote Originally Posted by turbo56k View Post
    Hi guys,

    I'm interested in lowering my 06 lux too. I was think maybe dropping it to 1inch. The car serve as a family car, will not be tracking what so ever. Often carry abit of weight due to 2 kids (prams and stuff in the boot). Comfort is more important then performance. Street driving (lots of speed hump). thanks in advance Any recommendation????

    also would this mod stuffs up the car's warranty????

    regards,

    T56k
    Eibach springs and Bilstein dampers are probably the way to go for your requirement. But I'm not sure how much they lower your car by. Ask Tony1234, he has that on his car.
    Last edited by aaronng; 14-05-2007 at 05:49 PM.
    --------------------------------------
    Stocky CL9 - 1:17.2

  2. #2
    Member Array
    Join Date
    Aug 2005
    Car:
    "07" CL9 Limited Lux
    Quote Originally Posted by aaronng View Post
    Eibach springs and Bilstein dampers are probably the way to go for your requirement. But I'm not sure how much they lower your car by. Ask Tony1234, he has that on his car.
    Yeh i enquired Eibach in regards to the prokit...lowers the euro 30-35mm (~1.5inch) at the front and about 30mm at the rears.
    Tony1234 said he got the Eibach springs, Bilstein shocks, Eiback camber (i think) for about $2200. Hopefully i will get mine sometime later this year!!

  3. #3
    Member Array
    Join Date
    Oct 2004
    Location
    Sydney
    Car:
    CL9 Euro, Evo 8
    Hey guys my suspension and camber kit has arrived! Going to install it either this week or next.

    I'm thinking of lowering it about an inch front and back and set the suspension dampening right at the middle. Would that be a good setup for daily spirited driving (plus occasional tracking)? Since it's FF, maybe it would be better to set it firmer in the rear? I wonder if it would cause clearance problems with my cusco lower tie bar too.

  4. #4
    Member Array
    Join Date
    Aug 2006
    Location
    Sydney
    Car:
    06 Euro luxury manual
    Quote Originally Posted by snYpz View Post
    Yeh i enquired Eibach in regards to the prokit...lowers the euro 30-35mm (~1.5inch) at the front and about 30mm at the rears.
    Tony1234 said he got the Eibach springs, Bilstein shocks, Eiback camber (i think) for about $2200. Hopefully i will get mine sometime later this year!!
    Yep.I've got that setup.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.