Your Mods To 2006-2011 FD Civics

[Aco3n]

mine:

Mugen kit
eibach sportline
18" --> to be replaced with standard rims soon.

and a descent sound system .. really really hard in getting the parts

[denot]

guys... can we make it as "mandatory" to post your car's pic as well? Or maybe a link to your car pics?

[ido09s]

I have to say i to would like some pics. I pick mine up next week, a black 5 speed Vti, and would like to see what this Mugen kit looks like and if people dont mind the costs involved and where they got the parts from

I plan on modding mine in about 3 months but want to put a set of 19's, dark tint and some springs to bring it just that little lower to the ground

I also want to do my stereo but and was wondering what people were doing with regards to the head unit?? is there some sort of interface that allows me to hook up some amps or have people been removing the stock head unit and replacing it with some sort of single din arrangement??? I have been told that the dash from a Jap spec model allows you to use a single din unit but if the stock head unit sounds the goods with some amps, splits and a sub i will leave it at that

[visconti]

nice!
3 q's

1) how are the 19"? are they really uncomfortable? was a bit concerned when a mate with 17s had very hard hard ride.

2) how's the muffler? mind if i ask price + install?

3) also curious about the HIDs.. i'm using crystalvision but not as bright as i'd like.

Thanks

1. Depends on your liking, its acceptable for me, but it is definitely firmer than stock of course. The springs might affect the ride as well. One thing I definitely notice.. fuel consumption goes up! lol

2. Its typical universal remus muffler, no louder than stock below 3k rpm, slightly louder above 3-4 rpm.. performance wise, I don't think it gives much gain. Catback is a better option if you're looking for performance.

3. My hid is brighter than standard halogen, so definitely an improvement.. but dunno if compared to other hids on the market. I kinda like 6k mtec hid color though.

[visconti]

mine:

Mugen kit
eibach sportline
18" --> to be replaced with standard rims soon.

and a descent sound system .. really really hard in getting the parts

dude, you should have gone 20" instead of back to standard.. lol

[Shimian]

Thanks

1. Depends on your liking, its acceptable for me, but it is definitely firmer than stock of course. The springs might affect the ride as well. One thing I definitely notice.. fuel consumption goes up! lol

2. Its typical universal remus muffler, no louder than stock below 3k rpm, slightly louder above 3-4 rpm.. performance wise, I don't think it gives much gain. Catback is a better option if you're looking for performance.

3. My hid is brighter than standard halogen, so definitely an improvement.. but dunno if compared to other hids on the market. I kinda like 6k mtec hid color though.

Any pics of your ride? I wanna see the sexy 19"s

[visconti]

Any pics of your ride? I wanna see the sexy 19"s

yup here.. http://www.ozhonda.com/forum/showthread.php?t=64867

[Aco3n]

jace: if you concern about comfy.. standard rims will be your best opt.. lower profile sacrifice your comfort..

yup here.. http://www.ozhonda.com/forum/showthread.php?t=64867

he's crazy.. don't follow him.. haha...

den.. you reckon 19x8.5 and 9.5 will fit?? tempted now.. haha.. got one cheap set laying around..
do you remember if the black one in sg.. is it 8 and 9 or 8.5 and 9.5?

[Shimian]

yup here.. http://www.ozhonda.com/forum/showthread.php?t=64867

holy moly. those 19's look sexy. Might change my mind now, from 18s to 19s

[Bob san]

06 vti

-16inch buddy club SF rims
-roadstone 225 16inch tyres (alot better then the stock tyres)
-Mtec HID light bulbs
-x-force full 2.25 cat back exhaust
-king springs lowered 1.5 inch rear and front
- vtec inside sticker lol

Fujita CAI soon to be installed.

[visconti]

jace: if you concern about comfy.. standard rims will be your best opt.. lower profile sacrifice your comfort..

he's crazy.. don't follow him.. haha...

den.. you reckon 19x8.5 and 9.5 will fit?? tempted now.. haha.. got one cheap set laying around..
do you remember if the black one in sg.. is it 8 and 9 or 8.5 and 9.5?

dunno man, depends on the offset, and u most likely need to roll the front and rear fender.. im using 19x8 with +45 and i need to roll my front guard, its scrapping so bad #$@#!! rear is fine though.

which one u're talking about.. is it visconti lx-d in melb?

[visconti]

06 vti

-16inch buddy club SF rims
-roadstone 225 16inch tyres (alot better then the stock tyres)
-Mtec HID light bulbs
-x-force full 2.25 cat back exhaust
-king springs lowered 1.5 inch rear and front
- vtec inside sticker lol

Fujita CAI soon to be installed.

bob san, any pics on your ride? wanna see how buddy club sf with fd will look like..