Trust sandwich plate

[BlitZ]

Ok.. Ive got a trsut sandwich plate..
The sensor holes on the plate are massive and are in metric.

I have guages with sensors in 1/8 imperial..

Where can i get a fitting to plug the sensors into the plate.. (ive already been to autobarn, supercheap, earls and pirtek)


And no i do not want to T off oringal oil pressure sender, drill hole in pan or buy a new sump bolt...



Thanks guys..

[weezer]

Its the same adapter you'd use to replace the oil pan drain plug. Its on the greddy site somewhere. I used a HKS one. I think they're the same

[BlitZ]

Its the same adapter you'd use to replace the oil pan drain plug. Its on the greddy site somewhere. I used a HKS one. I think they're the same

i got the sandwich plate here and a spoon sump bolt.. the sump bolt is smaller...if it was the same i would be getting vdo sump sender..

Let me check the website out..

[e240]

Drop by Pirtek...I go to the one on the way whetherill park, smithfield(?) very helpful.

Ok.. Ive got a trsut sandwich plate..
The sensor holes on the plate are massive and are in metric.

I have guages with sensors in 1/8 imperial..

Where can i get a fitting to plug the sensors into the plate.. (ive already been to autobarn, supercheap, earls and pirtek)


And no i do not want to T off oringal oil pressure sender, drill hole in pan or buy a new sump bolt...



Thanks guys..

[weezer]

i got the sandwich plate here and a spoon sump bolt.. the sump bolt is smaller...if it was the same i would be getting vdo sump sender..

Let me check the website out..

There are different sizes. You just have to find the right thread.

[fatboyz39]

Yes whetheril park Pirtek. Im sure you'll find the fittings needed there.

[BlitZ]

dont u guys read eheheh..
Ive been there and so as earls.. heheeh no good

[fatboyz39]

new sandwich plate FTW.

[weezer]

dont u guys read eheheh..
Ive been there and so as earls.. heheeh no good

12xP1.25 OIL ADAPTER


Temp. replaces oil pan drain plug
16400713 10.50
14xP1.25 OIL ADAPTER

Temp. replaces oil pan drain plug
16400714 10.50
18xP1.25 OIL ADAPTER


Temp. replaces oil pan drain plug
16400721 10.50
its one of those heheh think its the last one

[e240]

dont u guys read eheheh..

No, it takes too long, I just read the first line and the last....

Ok, Olympic Instruments - They sell VDO units, they might have the right adaptors. You have to look up the yellow pages, they're in Ryde...

[iced]

daniel la
autobarn should have the vdo sump plug sender adaptor for under 10$
i may have one lying around im not using
depending on where your sump bolt is on the sump it may not be problem
1/8NPT npz

[BlitZ]

daniel la
autobarn should have the vdo sump plug sender adaptor for under 10$
i may have one lying around im not using
depending on where your sump bolt is on the sump it may not be problem
1/8NPT npz

its just too messy.. its not something i could live with for the long term.. ...
I am thinking about removing it and making a bun in sump instead...