DC2 Vti-R 1/4times.......what should stock pull

**Spunkymonkey** · 22-08-2007 08:52 PM

Originally Posted by tinkerbell

aftermarket intake makes it louder... not faster

rofl...nice post lol

maybe I should run my car after engine re-con lol

**kNetz** · 23-08-2007 05:20 PM

u noe what i wana see? some video footage of a stock vtir going down the quater mile...

**T-onedc2** · 23-08-2007 07:59 PM

Originally Posted by EL_DC5

What the DC5R does 14.7 stock
how can a stock Vtir do low 14's stock ??????

Easy, a DC5R is rebaged Type S. And it depends on the driver and conditions.

**VTI-RRR** · 31-08-2007 07:21 PM

i have just purchased 4-1 headers a hi-flow cat and 2.5" piping for the system what should i do on top of that for my dc2 to run a better time than my 15 flat........???????????????

**dudeling7** · 31-08-2007 11:45 PM

light flywheel
clutch
weight
practice driving
many things come into play

**VTI-RRR** · 03-09-2007 05:34 PM

would a set of semi-sliks make a big differance or a set of good 15's diflated to the right PSI do the job????

**tinkerbell** · 03-09-2007 06:53 PM

practice makes perfect...

you need to "test" to know what makes the difference...

maybe semis if you get them warm enough,

or maybe brand new 205/65R15's would do it at 25PSI

**Angie** · 03-09-2007 09:22 PM

What 60ft times are you guys getting?? Apart from a k&n replacement filter my car is STOCK and i did a 15.8 on crappy falken AE329's with a 2.3sec 60ft time.

I thought that was good

**SLOWEGG** · 03-09-2007 09:53 PM

My friend was getting 15.1 2.2 60ft with CAI and shitty coilovers.

**code-87** · 03-09-2007 10:00 PM

Originally Posted by Angie

What 60ft times are you guys getting?? Apart from a k&n replacement filter my car is STOCK and i did a 15.8 on crappy falken AE329's with a 2.3sec 60ft time.

I thought that was good

practice makes perfect so a slightly better 60 ft time would help u out
but i think ur issue might be the tyres.
see about getting some better rubber n look at ur tyre pressure n u can hopefully get that time down
goodluck

**xtercii** · 03-09-2007 11:24 PM

tinkerbell is correct, to run semis you need to warm them up b4 they will start performing...

when I ran my car on rt615, I had to back off in second gear (I never had to do that even on the street running average street tyres) due bad wheelspinning and bouncing off rev limiter, and my engine was a very basic b18cr set up...