windscreen washer reservoir problem

**iversonruls** · 07-10-2007 07:46 PM

my dc5s have some problem with the washer reservior
the reservoir is empty btu when i try to refill it, its full after pouring some amount of water in. Then when i try the washer and after a few tries, its empty againn

soo whats the problemm??

thxx

**Zilli** · 07-10-2007 08:16 PM

a leak maybe?

**iversonruls** · 07-10-2007 08:26 PM

dun think its leaking cuz i tried it straight away after refill it
and no water underneath the car

**Int3gra-T** · 07-10-2007 09:27 PM

leak in the lines?

**blk_shadow** · 07-10-2007 10:36 PM

have you check that maybe the line is not connected properly to the nozzle. or missing the plastic connector (which is used to connect the two hoses to the nozzle)

**TheGoodDeal** · 08-10-2007 11:07 AM

May be the washer reservior has been clogged. Try to put garden water hose into down bottom of it and turn on water for a few minutes to flush out all the dirty stuff.

**traumatized** · 09-10-2007 10:19 AM

maybe you need to fill it up and let it sit for alittle for the water to sink in and then fill it up again. in saying this if this is the case you have a blockage somewhere.

**VTI-RRR** · 09-10-2007 10:24 AM

i have the same problem with my DC2 vti-r i would fill it up to the top use it once straight after and then the water is gone.......no leaks on floor naffing
(its magic......lol)

**iversonruls** · 09-10-2007 03:36 PM

Originally Posted by VTI-RRR

i have the same problem with my DC2 vti-r i would fill it up to the top use it once straight after and then the water is gone.......no leaks on floor naffing
(its magic......lol)

thats the problem!! =P
i might as well take it back to honda