Whiteline

[DNYALL]

sht, can't find my receit...

[ekhybrid]

WTF are you serious ?

Get all the photos you can of the bar / mounting , and all receipts etc of the kit. Everyone who has had this happen deserves to be compensated in some way or form - it isnt coincidence.




Read this thread , and you will realise its not relevant to the swaybar size. Its the "HEAVY DUTY MOUNTING KITS" that whiteline has for the EK / EG and DC series. They are weak and questionable mounting.

Refer to my post - http://www.ozhonda.com/forum/showpos...8&postcount=50

do you know of any civic with an 18mm bar that has cracked the subframe?

[beeza]

sht, can't find my receit...

I would be the same.I try to keep important ones but they always seem to get missplaced

[bennjamin]

do you know of any civic with an 18mm bar that has cracked the subframe?

mine. (2nd honda civic)
The 18mm swaybar uses the OEM mounts - this sheared thru the mounts and plucked the hole out of the subframe.

Old news..

[DNYALL]

here are some pics:
The right side is really bad!!





The left is also cracked but no where near as bad:

[Killa From Manila]

mine. (2nd honda civic)
The 18mm swaybar uses the OEM mounts - this sheared thru the mounts and plucked the hole out of the subframe.

Old news..

was this on an ek1 or ek4? does the ek4 have a stronger sub frame since it has 18mm swaybar stock?

[Zdster]

was this on an ek1 or ek4? does the ek4 have a stronger sub frame since it has 18mm swaybar stock?

Ben's was an eg (if I am not mistaken).

[bennjamin]

was this on an ek1 or ek4? does the ek4 have a stronger sub frame since it has 18mm swaybar stock?

correct as above - i had a EG hatch.

FYI the whiteline kit seems to tear out the same EK4 AND EK1's.

This issue is the heavy duty mounting.

[Zdster]

correct as above - i had a EG hatch.

FYI the whiteline kit seems to tear out the same EK4 AND EK1's.

This issue is the heavy duty mounting.

EM's as well (although I have yet to see/hear about an EJ?).

[newbie]

i will check mine out tomorow closer. but ive had my for about 2 yrs now. with no issues.. full mounting kit with tie and 22 sway. plus also had the front one done too.

anyone had issues with the front sway setups?

[DNYALL]

dude check it straight away, i have had mine for about the same amount of time and i thought i had no issues...now i have major issues...

[philBo]

has it been proven though that with the subframe reinforcement kits like the ASR, that the subframe tearouts are less likely to occur? as in, has anyone still heard of, or experienced damage even with the reinforcement?