Queensland track times

[barefootbonzai]

Some good times out there. I don't have my lap times, and haven't been out for ages, but last session out there i got a 62.00

Will be back out there one day...

[GTRVspec95]

Updated thanks for the confirmation

Keep the PB's rolling in I need to fill the other lists two if you've been out there ...

John Tetley from QR was talking about the development of Lakeside at the last Sprint meet so that will be a track the Honda's will no doubt be having a crack at when it reopens

[SPEEDCORE]

speed core? when did you do that time?
just wondering...

Dec 04' SAS. Did about 6-7 61.8s with the quickest being 61.81 from memory.

The wednesday previous to that I was at a general practice and had the missus timming me, was getting 61.8s also, BUT.... I took it with a grain of saly till I actually replicated it numerous times on official timed day.

Did not notice you guys where putting in engines. This was a standard EK4 with the previous mentioned mods, so B16.

[barefootbonzai]

This was a standard EK4 with the previous mentioned mods, so B16.

Now that's some gansta shit! i'm still waiting for some coaching lessons.

For the First page.
my car isn't ek4

EK1 - B18C - Semi's.

[GTRVspec95]

Dec 04' SAS. Did about 6-7 61.8s with the
Did not notice you guys where putting in engines. This was a standard EK4 with the previous mentioned mods, so B16.

Just remembered some drag racing tables and thought it was good information to add to the tables ...

Not saying it's not possible but 61 in an EK with only a B16 seems insanely quick ... do you still have the timing slips for these runs ?

[macoman69]

Not really. I remember Rob getting 59's in the CRX (B16) before getting the B20 put in.

So with the right suspension, weight reductions, brakes, tires and driver it actually seems quite possible.

[SPEEDCORE]

Heh.... here we go. Unfortunately I don't.

I'm sure the regulars that where out there back then will post responses in support of my claims.

Weight reduciton was tyre/jack and parcel shelf, yes full interior.

[vtec>turbo]

Yeah SPEEDCORE did those times, in a bashed up EK with full interior.

I got a 65.14 in a stock (bar swaybars) 4th gen prelude back in the beginning of 07.

[barefootbonzai]

Not saying it's not possible but 61 in an EK with only a B16 seems insanely quick ... do you still have the timing slips for these runs ?

I can vouch for his times. I remeber seeing the times when i first brought my EK.

Edit: I also remeber reading on some other forums that they didn't believe it, some funny shit.

[spoondc2]

I can vouch that too. That was my 3th or 4th time on QR and i was in his group at the time and i did 63 on my integra vti-r which only have endless SSS pads and cat-back. Still using GIII and full interior except jack and spare wheel.

[spoondc2]

66 sec on sprint track (wet) in stock DC2R with super streets.
+ having semi's worn to the wires
+ first time on track

Is this good? And how much time could you say a wet track would add to your time?

John(QR boss) told me if the track is fully wet then maybe 1.5 secs, if it's not really wet then it will be less than 1 sec difference.

The fastest DC2R with completely stock everything did 63.3 i believe, forgot who did it but it was in wed sprint back in 04. Lots of people did really good times with full interior and light bolt on mods. Wonder where they went

[macoman69]

I can vouch that too. That was my 3th or 4th time on QR and i was in his group at the time and i did 63 on my integra vti-r which only have endless SSS pads and cat-back. Still using GIII and full interior except jack and spare wheel.

Get back to work and start designing Alvin, otherwise the guy that feels threatened might tell on you. ahahahaha.