Page 2 of 2 FirstFirst 12
Results 13 to 15 of 15
  1. #13
    Member Array
    Join Date
    Feb 2005
    Location
    KiramtoKoonet
    Car:
    gogomobile
    I wouldn't cut the remote wire, just in case you want to run an amp or something later on.

    The yellow green wire provides power to the antenna
    "When a man has reached the stage of having just about everything a woman could ask for, she usually does."

    /Oo ___H___ oO\
    |=_/_______\_=|

    Learn how to detail properly

    http://www.guidetodetailing.com/

  2. #14
    Member Array
    Join Date
    Jul 2006
    Location
    Sydney
    Car:
    MX-5 SE
    lol.. dont cut anything...

    if u wona get rid of antenna just disconnect it... its what i did coz the massive metal one looks weird.. especially on the track where i like 2 listen 2 my music :P

    basicly all u gota do is remove the rear strut at back of boot, push in those clips on the rear centre black trim and undo the bolt for the harness thing or woteva it is (im pretty sure they are all 12mm) then once that out remove the trim bit on the left of the boot.
    To do this remove the suspension top trim and in there is a 10/12mm undo that then tug on the top of the left trim, it will come loose... once loose get a torch in there and u will c a blue wire i think it is, just disconnect that and cable tie it 2 another wire or something so it doesn't rattle around....

    feel free 2 add rep :P hehe
    'The Dave'

    Old - DC2R - 122fwkw - 1:10.6 WP

    New - MX5 SE - 165rwkw -

  3. #15
    Member Array
    Join Date
    Jul 2006
    Location
    Sydney
    Car:
    CL9
    +1 rep, just did it.. no more RC looking ITR

    Quote Originally Posted by SHIFTY View Post
    lol.. dont cut anything...

    if u wona get rid of antenna just disconnect it... its what i did coz the massive metal one looks weird.. especially on the track where i like 2 listen 2 my music :P

    basicly all u gota do is remove the rear strut at back of boot, push in those clips on the rear centre black trim and undo the bolt for the harness thing or woteva it is (im pretty sure they are all 12mm) then once that out remove the trim bit on the left of the boot.
    To do this remove the suspension top trim and in there is a 10/12mm undo that then tug on the top of the left trim, it will come loose... once loose get a torch in there and u will c a blue wire i think it is, just disconnect that and cable tie it 2 another wire or something so it doesn't rattle around....

    feel free 2 add rep :P hehe

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.