ITR bits into an EG conversion.. Lot's of questions

[Paul1985]

honbits in smithfield quoted me $400 for new fuel lines, fuel tank, fuel pump and efi wiring harness for behind the dash for my itr eg carby coversion, if you have any sort of mechanical knowlege anyone can remove the tank an lines an replace them with efi ones its the wiring behind the dash that becomes the fun part

swapping a complete wiring loom for another complete wiring loom isnt difficult, if you can swap a tank and lines then you can do the wire swap with absolute ease.

[teh_mechanic]

You still need a return line.

As paul has said above those are the parts that will give you the best result in a hatch.

theres already a return line.like paul said there are already 3.your carby car still has a mechanical fuel pump (on the engine),this fuel pump,while not as high pressure as the efi electric one,still pumps way to hard to just be feeding it into the carby,so there is still a return line to get the fuel back to the tank that isnt needed in the carby

[Paul1985]

very good info on this subject teh_mechanic, helped clear alot up for me. Trying to give u rep points but i need to spread some first lol.