does anyone know wot tool i could use to tighten the bottom end (of the actual damper)
it becomes a lil loose after a while over time and i hand tighten it.
"since we're both asian.. I'll look after you and chuck in King Springs with the wheels and tyres for $1050"
what are they for exactly sorry ive nerver heard anything about what they acctually do ? i get the general drift? support then engine and what not but is there more to it?
Last edited by hondavti25; 03-03-2008 at 05:47 PM.
their better than having solid mounts imo.. but that one you posted above looks chat....
and the US$25 shipping to Australia at the top of the page is incorrect... if you look at their shipping conditions, "INTERNATIONAL SHIPPING IS FOR CANADA, PR, HI, AK, ALL BUYER FROM OTHER COUNTRY PLEASE EMAIL FOR SHIPPING QUOTE"
Shipping will be heaps more than that... you may as well get the INGALLS
Originally Posted by Slow96GSR
If 1 person has had bad luck with a product don’t condemn it until you yourself have tested it. Now if 10 pros have tried it and it sucked then I would trust their opinion.
what are they for exactly sorry ive nerver heard anything about what they acctually do ? i get the general drift? support then engine and what not but is there more to it?
does the same thing as solid engine mounts, prevents the engine from rocking on acceleration or hard shifting which translates to instant torque transfer to the gearbox then to the road...
difference to solid mounts is that these won't make your cabin shake.... it works like any other damper like sussy shocks... they'll absorb impact and prevent movement but eventually give which still translates to torque transfer because pressure maintained at all times, shock body will eventually travel. solid mounts will make your engine bay rock solid full time and idle vibrations will chatter everything in the cabin
Originally Posted by Slow96GSR
If 1 person has had bad luck with a product don’t condemn it until you yourself have tested it. Now if 10 pros have tried it and it sucked then I would trust their opinion.
I've got the Energy suspension motor mount inserts on the bottom 2 mounts,haven't done the pain in the ass rear mount yet...and I'm planning to do the top 2 mounts the same way.Is it overkill to use a engine torque damper aswell?
Maybe,do you know or think it will be a better combination to have the 3 lower mounts as ES inserts and the torque damper and don't do the top 2 mounts? The vibrations atm are nice but anymore may be a bit much for a comfortable daily...
This is interesting,to get the right combination.
I've got the Energy suspension motor mount inserts on the bottom 2 mounts,haven't done the pain in the ass rear mount yet...and I'm planning to do the top 2 mounts the same way.Is it overkill to use a engine torque damper aswell?
Maybe,do you know or think it will be a better combination to have the 3 lower mounts as ES inserts and the torque damper and don't do the top 2 mounts? The vibrations atm are nice but anymore may be a bit much for a comfortable daily...
This is interesting,to get the right combination.
if your set on getting the damper don't bother doing the rear mount... does the exact same thing not worth the effort doing the rears trust me... i would rather pay $100 for labour... i ended up doing one on my own after bennjamin showed me....
Originally Posted by Slow96GSR
If 1 person has had bad luck with a product don’t condemn it until you yourself have tested it. Now if 10 pros have tried it and it sucked then I would trust their opinion.
The NRG one is tops in my opinion. They're very close to Spoon ones as a matter of fact...if not, better without the JDM wank factor. Keeps the extra engine movement under control and gives you a bit more traction. Your engine will put down torque better with one of these, but in no way will it offer you any power gains...just allows your car to move off the line easier without as much wheel hop.
You'll have a bit more cabin noise since it's attached between your block and firewall...It's totally worth it though.
Will it still be worth doing the top 2 mounts with this?
nope... pretty much don't need to do any of em with one of these unless your motor makes so much torque that you shred your mounts.
Originally Posted by Slow96GSR
If 1 person has had bad luck with a product don’t condemn it until you yourself have tested it. Now if 10 pros have tried it and it sucked then I would trust their opinion.
$70 AU delivered
Reply With Quote
Originally Posted by beeza
Bookmarks